Search results

  1. R

    2006 gmc yukon xl parking brake adjuster keeper.

    Crazy question here. What is the name of part #3 in the diagram?
  2. R

    2006 gmc yukon xl parking brake adjuster keeper.

  3. R

    parking brake problems

    I’m wondering if you found a fix for this situation as I now have a similar problem. I’ve removed my back calipers and adjusted my parking brake shoes 3 times and can’t possible get the drum rotor back on if I adjust them out further. Yet, parking brake goes all the way to the floor.
  4. R

    Intake Manifold Gasket Leak?

    Thanks BrianBrianBrian: I'll have to check this possibility out. I still have to figure out what is drinking my coolant from on the inside of my engine. It is crazy that GM has has so many Intake Manifold Gasket issues over the years and from what I am able to find out they have never owned...
  5. R

    Intake Manifold Gasket Leak?

  6. R

    Pressure Testing Coolant System

    I pressure tested my coolant system today on my 1999 Yukon 5.7L after suspecting an internal coolant leak somewhere with a sometimes rough running engine, a little white tailpipe smoke and the loss of about 4 oz of coolant every 250 miltes. I pumped the pressure up to 16 lbs. Waited 15 minutes...
  7. R

    Intake Manifold Gasket Leak?

    A new twist to the bucking Yukon under strain today. I took it for a little ride an experiment. We have a steep grade bridge near myhome so I started up it not pulling anything, but I set the cruise control at 55 mph. As soon as the incline began the Yukon started bucking. I pulled the auto gear...
  8. R

    Intake Manifold Gasket Leak?

    A new twist to the bucking Yukon under strain today. I took it for a little ride an experiment. We have a steep grade bridge near my home so I started up it not pulling anything, but I set the cruise control at 55 mph. As soon as the incline began the Yukon started bucking. I pulled the auto...
  9. R

    Intake Manifold Gasket Leak?

    I have read countless threads about the problems people have had with Tahoes and Yukons losing power and getting the shimmy/shakes or bucking when on slight inclines. It seems to be most prevalent when pulling a boat or trailer of some sort. This is true in my case anyway. I have put...
  10. R

    Timing

    I probably should have left well enough alone, but I jumped in with both feet and I lost ground instead of gaining. I put rebuilt heads on my 99 Yukon 5.7 Vortec a few months ago. I got a check engine light P0301 OBD that said my number 1 cylinder was not firing. Made sense, as it always ran...
  11. R

    Electrical connection

    You are correct. Thanks for the help!
  12. R

    Electrical connection

    I replaced cracked heads with rebuilts several months ago. After everything was back together, my 5.7 L vortec started but ran rough. Check engine light code shows P0301, misfire on cylinder #1. I was nosing around under the hood and found an electrical connection that was not connected into...
  13. R

    Brake light problem 99 Tahoe LT

    Me Too! Guido, I don't know if I will be of any help but I also have a 1999 Yukon and I'm having the same problem. I depress the brake pedal and they come on at first, but go off as the brake pedal goes down further. I have replaced the brake light switch which is at the top of the brake...
  14. R

    1998 Tahoe rebuild

    Same Problem Here Craig, Sorry I can't offer much help, as I am having a similar problem, so I'll be watching the responses to your post closely. I didn't do a complete rebuild, just replaced two cracked heads. I took some pictures that will probably help, but I anticipate I'll have...

Forum statistics

Threads
132,001
Posts
1,860,693
Members
96,400
Latest member
Njoppy

Latest posts

Top