05Single's virgin build thread. 03 tahoe

[#1taho]

Depends how deep it is. I had a heavy scratch and had it buffed out. It's still there but blends in good

 

[05Single]

Have a thread on this but figure I post this here too.
http://www.tahoeyukonforum.com/threads/center-console-led-light-mod.78654/


Night time shots






Emergency stripper dollar bills

 

[05Single]

Depends how deep it is. I had a heavy scratch and had it buffed out. It's still there but blends in good

Yea we will see , and find out this week

 

[05Single]

Part of that same thread

 

[05Single]

Prepped my carpet for a proper shampoo with an extractor.
Fyi the plastic trim for the 3rd row are not clipped on but glued on lol. No big deal just thought it was strange GM would glue these down. Guess I'll glue then back down later .
Removed seats and door sill plates too. Wasn't really bad to begin with so they came out almost like new.
Now every piece of my interior is near spotless and my ocd can focus on other stuff like paint .






I'm thinking of what I can put down in the cargo area but I can still cut out the holes for the 3rd row too as a protective layer like rubber or plastic. Any ideas ?

 

[Fosscore]

Carpet looks good.

If not buying an actual cargo liner and not shooting for a pretty application...

... just a thought why not get a big piece of rubber matting off the roll and cut to fit.

Or this stuff is pretty badass. We use it on the boats. Again not sure what application you are shooting for so just winging ideas into the Last Frontier.

http://www.dri-dek.com/?gclid=CO3pot7T684CFY4kgQodknANVg

 

[osiris94ej]

Prepped my carpet for a proper shampoo with an extractor.
Fyi the plastic trim for the 3rd row are not clipped on but glued on lol. No big deal just thought it was strange GM would glue these down. Guess I'll glue then back down later .
Removed seats and door sill plates too. Wasn't really bad to begin with so they came out almost like new.
Now every piece of my interior is near spotless and my ocd can focus on other stuff like paint .






I'm thinking of what I can put down in the cargo area but I can still cut out the holes for the 3rd row too as a protective layer like rubber or plastic. Any ideas ?

Lund 411502 Catch-All Xtreme Gray Rear Cargo Floor Mat https:
//www.amazon.com/dp/B0009N4G3A/ref=cm_sw_r_cp_apa_0.SXxb0512CN1

Sent from my SM-N920V using Tapatalk

 

[Tonyrodz]

Pioneer AVH-....POS lol.
It's ok for a basic deck but I kick myself for not stepping up to a nicer one.
It randomly turns off and restarts sometimes. I have no idea why. Need to bench test it.






Makes a big difference in sound. It's like it finally breathes life into these bose speakers.....remember the owner before was an old geezer so these speakers were never abused. Don't worry I'm still getting aftermarket sub and amp later

I had to remove that metal brace behind the radio to get my Pioneer in. Mine was too deep and it wouldn't go all the way in. Fyi-metal edges we're very sharp! I think mine is the AV-X2600BT.here's my parking brake bypass.

 

[Tonyrodz]

.

 

[tgui]

Looking good!!