14 bolt rear end swap?

[Jonmurphy]

Maybe @Dantheman1540 can chime in and answer my question.

Hello there friend.. I like to pay For advice on my 2001 Yukon Denali 6.0 l .. I need to get some lower gears its 4 wheel drive with a Single speed transfer case I read its 60%
Rear powered So it must have a fluid cupling thing inside ,true? Or is it strictly a gearbox ?
Years ago I was a chevy high performance mechanic.. Thanks for your anticipated help Jon

 

[swathdiver]

Hello there friend.. I like to pay For advice on my 2001 Yukon Denali 6.0 l .. I need to get some lower gears its 4 wheel drive with a Single speed transfer case I read its 60%
Rear powered So it must have a fluid cupling thing inside ,true? Or is it strictly a gearbox ?
Years ago I was a chevy high performance mechanic.. Thanks for your anticipated help Jon

Single speed TC in a 2001 Denali? What are your "N" RPO codes? NR4?

 

[mattt]

Is there an assortment of ratios on the 2wd AXN axles? I would just stick with my 3.42 gears. Snappy enough and decent on fuel mileage.

If you get an AXN rear axle from an 05-06 Escalade, there is no assortment or gear ratio. They are all 3.73:1 gear. I have one sitting on the ground waiting to go in a Tahoe and they're kinda rare in the GMT800 vehicles. 2wd Escalade 6.0 Only.

 

[CaptainAmerica1]

07+ rears are an inch wider aren’t they?

 

[CaptainAmerica1]

Is there an assortment of ratios on the 2wd AXN axles? I would just stick with my 3.42 gears. Snappy enough and decent on fuel mileage.

Most of the 07+ AXNs I’ve seen are 3:42