2004 Tahoe takes off when I release the brake pedal

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jeff99

TYF Newbie
Joined
Dec 6, 2016
Posts
3
Reaction score
0
I haven't been driving this rig much for the last 5 months, but it seems odd that now when I am on level ground, brake pedal pushed in, in 'drive', and when I release the pedal the care will accelerate to 10-12 mph. I feel like I'm trying to hold back a horse that wants to get going. What adjustments can I make so when I release the brake, the care doesn't move?


Idle speed 800. Z71 v8.

Thanks for any advice.
 
Last edited:

cmc76

Full Access Member
Joined
Sep 5, 2014
Posts
685
Reaction score
313
800 seems a bit high for idle. you dont say what year, so i dont know if you have a cable or wire to throttle body.
and im not even sure of it, but a throttle relearn may correct the idle, if its drive by wire not cable.
 

cmc76

Full Access Member
Joined
Sep 5, 2014
Posts
685
Reaction score
313
04 will have the drive by wire, its what i have. look up the throttle relearn, i did it over the summer but forgot what it is.
that may be your issue.

And now i feel like an *******. i just realized your thread title had the year in it.
 
OP
OP
J

Jeff99

TYF Newbie
Joined
Dec 6, 2016
Posts
3
Reaction score
0
Heh, no worries, cuz you solved my problem! I blew out the O2 sensor at the air filter, removed the negative cable from the batter for 5 minutes, put it all back together--- and it drives as it should. Thanks!
 

Forum statistics

Threads
132,381
Posts
1,867,149
Members
97,024
Latest member
gbc60
Top