Dantheman1540
Full Access Member
I've wanted one for years!
2008 Yukon Denali, 135k miles, part 2!!
- Thread starter tgui
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
trailblazer
Full Access Member
- Joined
- Jan 22, 2019
- Posts
- 281
- Reaction score
- 394
I live in the great white north and my go-to friends are my Milwaukee brushless M18 1/2 impact (1100ft/lb?), Port-A-Torch set, and the Mayhew Shake N Break air hammer socket adapter set.
I recently started to use the Shake N Break 1/2 and 3/8 and they are PRICELESS. While it’s hammering the bolt you turn it with a 3/4” wrench. It’s a total bolt saver. Some bolts still need to be heated cherry red but when used with the Shake tool they don’t snap. Pair are $30.
https://www.toolsource.com/air-chis...lt-breaker-air-hammer-accessory-p-148800.html
I recently started to use the Shake N Break 1/2 and 3/8 and they are PRICELESS. While it’s hammering the bolt you turn it with a 3/4” wrench. It’s a total bolt saver. Some bolts still need to be heated cherry red but when used with the Shake tool they don’t snap. Pair are $30.
https://www.toolsource.com/air-chis...lt-breaker-air-hammer-accessory-p-148800.html
Sam Harris
Supporting Member
X2! Fun, fun!
kbuskill
***CAUTION*** I do my own stunts!
Surely the passenger side will go better!
1st bolt ripped off. The shop is a block from my house.
A sawzall with a good metal blade, like a Diablo, will make fairly quick work of those bolts.
Slide the blade between the bushing and the brackets on the frame.
These carbide tipped ones?
https://www.amazon.com/Diablo-DS060...eywords=Diablo+DS0608CF&qid=1588278325&sr=8-1
kbuskill
***CAUTION*** I do my own stunts!
These carbide tipped ones?
https://www.amazon.com/Diablo-DS060...eywords=Diablo+DS0608CF&qid=1588278325&sr=8-1
Those would probably do it... I've never used that particular one, I usually use the fine tooth blades, but the Diablo blades cut very well.
Good to know. Thanks for the ideas!
kbuskill
***CAUTION*** I do my own stunts!
You probably want to get a couple of them as you will only be cutting with the very tip of that blade due to clearance issues... it's not like you can get full use of the blade in this situation... but you can keep the blades for later use.
