21 Denali Front Plate Options

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tk59194

Full Access Member
Joined
Dec 29, 2017
Posts
345
Reaction score
338
No mount to install where tow hooks go unfortunately. I've looked everywhere. I may fabricate something myself for my tahoe. I ended up ordering a no drill bracket from a company called slybrackets.com for my wife's Suburban. Ugly as sin, but it works well
 

Attachments

  • 20210707_201545.jpg
    20210707_201545.jpg
    152.1 KB · Views: 15
  • 20210707_201552.jpg
    20210707_201552.jpg
    409.8 KB · Views: 14
  • 20210707_201834.jpg
    20210707_201834.jpg
    263.3 KB · Views: 15

jorgetoro

TYF Newbie
Joined
Aug 29, 2021
Posts
29
Reaction score
12
Any other options? Front tow hook maybe? Same issue here. I don't want to drill holes on the bumper either.
 

rdhogg

Full Access Member
Joined
Oct 28, 2011
Posts
491
Reaction score
1,246
Location
Houston
I always carried the front plate under the front seat and in case I got stopped, which I have gotten stopped 8-9 times, I would tell / show the officer that there was not any front mounting bracket, tell them that I had one on order, and beg forgiveness, say how crazy it was for the mfg not to supply one. This worked from 1976 (280 Z), 1989 (Turbo Porsche ) about 4 other cars/trucks all the way up to the 2013 Tahoe ( I finally put one on )
 

Brandon2489

Full Access Member
Joined
Jul 28, 2018
Posts
138
Reaction score
101
In the past I have used some of the small rare earth magnets that are very strong. Epoxy 2 magnets to the back of the license plate then put a thin sheet of rubber over the magnets and trim it up so it look good. Then epoxy 2 more magnets to backside of bumper where you want the plate to go. Bam done. Easy to put on and take off. I did this on my s2000 for 3 years while I lived in Illinois. Worked great.
 

rdhogg

Full Access Member
Joined
Oct 28, 2011
Posts
491
Reaction score
1,246
Location
Houston
In the past I have used some of the small rare earth magnets that are very strong. Epoxy 2 magnets to the back of the license plate then put a thin sheet of rubber over the magnets and trim it up so it look good. Then epoxy 2 more magnets to backside of bumper where you want the plate to go. Bam done. Easy to put on and take off. I did this on my s2000 for 3 years while I lived in Illinois. Worked great.
Sounds like a plan.
 

Forum statistics

Threads
132,324
Posts
1,866,004
Members
96,920
Latest member
BLS9
Top