23 Denali/Super Cruise Defective

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rinconmike

TYF Newbie
Joined
Oct 7, 2017
Posts
9
Reaction score
7
I have Super Cruise on a 2023 GMC Sierra 1500 Denali Ultimate. The Super Cruise works, but Auto Lange Change does not work.

I am not in Haul Mode. When trying to change lanes I get the message that shows an Exclamation mark and says "Unable to change Lanes" I think this is the same message that would come up if towing something (I am not). Nothing hooked to the hitch.

The Dealer does not know the issue. So I am just waiting for now to see if a software update eventually fixes it.

I figured I would post here to see if anyone else have a similar issue?
 

UsualSuspect

Full Access Member
Joined
Feb 21, 2022
Posts
241
Reaction score
156
Location
SoCal
So far mine works, changes lanes by itself, changes lanes when I activate the turn signal manually. Things I found that are just quirks, if you activate the turn signal manually and it isn't 3/4 of the way into the lane you are changing into, it changes back. I found using it in Carpool lanes will cause abrupt steering movements, especially when there is a 2 foot area between the lane markers, and an exit or entrance area has lines that are at a sharp angle, the steering will move at the same sharp angles. Construction areas where the lanes have been moved about 5', the SC wants to drive in the old lane area, not in the new one. Otherwise, so far, so good.
 

Forum statistics

Threads
132,332
Posts
1,866,196
Members
96,956
Latest member
The Hause
Top