#8 spark plug

[07hoeCHEVY]

NEW to fourm what is the easiest way to remove #8 spark ? Thank

Sent from my SM-N950U using Tapatalk

 

[Doubeleive]

just use a combination of a adapters, I did that and attached a small ratchet with a breaker over it easy peasy

 

[Chrismnj]

I know easier way, bring it to a dealer

 

[swathdiver]

We used a 3/8 to 1/4 reducer and a 1/4 inch ratchet but were still too weak to break it loose, still in there! Which reminds me, I should give it a try again.

 

[HiHoeSilver]

There are tons of options when it comes to adapters /extensions, etc. But the SK 45159 3/8" extension is supposedly the "magic" key.

 

[Doubeleive]

We used a 3/8 to 1/4 reducer and a 1/4 inch ratchet but were still too weak to break it loose, still in there! Which reminds me, I should give it a try again.

put a breaker on that ratchet it come out

 

[Rocket Man]

There are tons of options when it comes to adapters /extensions, etc. But the SK 45159 3/8" extension is supposedly the "magic" key.

Yep. That and a regular ratchet.

 

[Fless]

For my NBS I picked up a wobble extension set from HF and used the very short 3/8" drive extension: https://www.harborfreight.com/search?q=67971, 61278

And a skinny arm or two...

 

[Hi-psi]

Regular spark plug socket + 3/4" short socket on the end. It is just the right length to extend beyond the manifold, but leave room to get a regular 3/8" rachet in there to bust it loose.

 

[marktrafton]

On my 2004, I spent 5 to 10 minutes removing the tin heat shield and access to the #8 spark plug was a breeze. I am not sure if this would be the same on a 2007 to 2014.