Accommodations for CCM 2.5/1

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Grimes

Full Access Member
Joined
Apr 13, 2013
Posts
413
Reaction score
4
So before I go to get this CCM kit installed, I did want to check a few things to avoid surprises. Its the CCM 2.5/1 that it seems most of y'all have touched at some point.

I have a Ranch Hand brush guard. Will the shop need to modify brackets in order to accommodate the lift?

How will the trailer hitch be effected? Will the rear bumper need to be adjusted?

Thanks!
 

vt_hokie2008

Full Access Member
Joined
Mar 5, 2012
Posts
393
Reaction score
9
Location
VA
So before I go to get this CCM kit installed, I did want to check a few things to avoid surprises. Its the CCM 2.5/1 that it seems most of y'all have touched at some point.

I have a Ranch Hand brush guard. Will the shop need to modify brackets in order to accommodate the lift?

How will the trailer hitch be effected? Will the rear bumper need to be adjusted?

Thanks!

It's just a suspension lift, so nothing will have to be adjusted. The whole vehicle will just be a little higher up, including your hitch and brush guard.
 

yates ™

Resident Apple hater
Supporting Member
Joined
Jul 9, 2010
Posts
24,409
Reaction score
6,421
Location
Iowa
You're thinking of a body lift not a leveling kit.
 

Zed 71

Full Access Member
Joined
Sep 30, 2009
Posts
1,229
Reaction score
12
Location
Pacific NW
So before I go to get this CCM kit installed, I did want to check a few things to avoid surprises. Its the CCM 2.5/1 that it seems most of y'all have touched at some point.

I have a Ranch Hand brush guard. Will the shop need to modify brackets in order to accommodate the lift?

How will the trailer hitch be effected? Will the rear bumper need to be adjusted?

Thanks!

Your picture shows an NBS rig and to raise the front folks usually use keys for the torsion bars. The CCM kit is for NNBS rigs.
 
OP
OP
G

Grimes

Full Access Member
Joined
Apr 13, 2013
Posts
413
Reaction score
4
Your picture shows an NBS rig and to raise the front folks usually use keys for the torsion bars. The CCM kit is for NNBS rigs.

Guess I should've changed my signature sooner rather than later.
 
OP
OP
G

Grimes

Full Access Member
Joined
Apr 13, 2013
Posts
413
Reaction score
4
Before:
20150716_083638_zpsfbsyu9cw.jpg

After:
20150716_180855_zpsxbym1vak.jpg

I'm very happy about the look. Was $360 to install, but, oh well. Said he'd give it a look and retorque at no cost after a few hundred miles. But again, I'm very happy with the look.
 
OP
OP
G

Grimes

Full Access Member
Joined
Apr 13, 2013
Posts
413
Reaction score
4
Grimes, it does make it look better. What size are your tires there?

Think I measured 31.5 once, hope to get 32-33 once these wear. I'll go look at the code later. They are just some random bridgestone A/T tires not of my choosing nor preference.

Edit: 255/70R18
 
Last edited:

Forum statistics

Threads
132,381
Posts
1,867,136
Members
97,023
Latest member
Yeagermeister84
Top