Barry28a
TYF Newbie
- Joined
- Jan 10, 2012
- Posts
- 15
- Reaction score
- 0
Anyone know how to get my keyless entry to work after an aftermarket alarm was removed?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
If all is back to normal and stock alarm is ok, you can try the relearn programming. Here it is on first post-
http://tahoeyukonforum.com/forum/showthread.php?t=21497&highlight
OK. I'd try to see if the keyless remote works. Go to autozone or local parts store and they usually have a key fob tester. You just point your fob at it and press a button and the receiver will tell you if it's sending a signal. If not, check the battery in the fob.