Air Suspension Leak Down after Sitting 2 Weeks

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,205
Reaction score
39,274
Location
Stockton, Ca.
Tanks are aluminum. It’s warranty, so taking it to dealer. Hope the tech is motivated…
lol, ya good luck. "maybe" they have a method to externally pump it up to higher pressure to help detect a leak.
I would expect to be put at the end of the line on this one....especially being warranty
 
OP
OP
WalleyeMikeIII

WalleyeMikeIII

Full Access Member
Joined
Feb 22, 2022
Posts
2,260
Reaction score
1,851
Location
Sunny and Snowy Minnesota
lol, ya good luck. "maybe" they have a method to externally pump it up to higher pressure to help detect a leak.
I would expect to be put at the end of the line on this one....especially being warranty
It did leak down afte 3 days this weekend, so I may ask them to just keep it a few days and watch it. They are providing a loaner, so we will see. I documented the issue w/ photos as well...dealers around here are pretty decent, will see.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,205
Reaction score
39,274
Location
Stockton, Ca.
It did leak down afte 3 days this weekend, so I may ask them to just keep it a few days and watch it. They are providing a loaner, so we will see. I documented the issue w/ photos as well...dealers around here are pretty decent, will see.
that should make is easier to find, they could come back with "that's normal" or some crap, even though we all know it's not. good luck
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,390
Reaction score
2,057
Location
Virginia
You might also look to see if GM put out any TSB’s on this issue.
 
OP
OP
WalleyeMikeIII

WalleyeMikeIII

Full Access Member
Joined
Feb 22, 2022
Posts
2,260
Reaction score
1,851
Location
Sunny and Snowy Minnesota
You might also look to see if GM put out any TSB’s on this issue.
Pretty up to speed on most of the TSB's, there was one early in production for very cold climates...but my vehicle was built after the engineering change to resolve it. And, it is not a cold weather thing...has been plenty warm here...at least until today.
 

Polo08816

Full Access Member
Joined
Aug 24, 2010
Posts
764
Reaction score
314
Not a good sign for a 2 year old vehicle. This makes me very wary of the air suspension (on any non-commercial application). We went to test drive a few 2024 Suburban gas variants (5.3L and 6.2L). I noticed the 2024 Suburban Z71 with Air Ride suspension's rear was lower than the front by about 2" when it was parked before the test drive. It did return to normal height at some point during the test drive.
 
OP
OP
WalleyeMikeIII

WalleyeMikeIII

Full Access Member
Joined
Feb 22, 2022
Posts
2,260
Reaction score
1,851
Location
Sunny and Snowy Minnesota
Not a good sign for a 2 year old vehicle. This makes me very wary of the air suspension (on any non-commercial application). We went to test drive a few 2024 Suburban gas variants (5.3L and 6.2L). I noticed the 2024 Suburban Z71 with Air Ride suspension's rear was lower than the front by about 2" when it was parked before the test drive. It did return to normal height at some point during the test drive.
I bought the air due to my frequent towing…and for that it’s great.
 
OP
OP
WalleyeMikeIII

WalleyeMikeIII

Full Access Member
Joined
Feb 22, 2022
Posts
2,260
Reaction score
1,851
Location
Sunny and Snowy Minnesota
Well, the dealer had it today for diagnosis. Was returned as “operating at designed.”

The dealer returned a document from GM explaining the Air Suspension Operation. A pic of that document is attached. It says sag is normal to the tune of 2mm (0.08”) in 24 hours at constant temperature. So, my 1-1.5” in 72 hours exceeds that.

I’ve e-mailed my service advisor for further clarification and suggested we let it sit in their climate controlled facility for 72 hours and measure it every 24, to see if it is still in spec. Haven’t heard back.
 

Attachments

  • IMG_1403.jpeg
    IMG_1403.jpeg
    166.9 KB · Views: 4

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,205
Reaction score
39,274
Location
Stockton, Ca.
Well, the dealer had it today for diagnosis. Was returned as “operating at designed.”

The dealer returned a document from GM explaining the Air Suspension Operation. A pic of that document is attached. It says sag is normal to the tune of 2mm (0.08”) in 24 hours at constant temperature. So, my 1-1.5” in 72 hours exceeds that.

I’ve e-mailed my service advisor for further clarification and suggested we let it sit in their climate controlled facility for 72 hours and measure it every 24, to see if it is still in spec. Haven’t heard back.
FIGURED AS MUCH
my advice is go out and stick a sewing needle thru that bladder a few times, then take it back and say "check it again"
but do it on the bottom edge where it rolls so it doesn't look suspicious
schultz.JPG
 

Forum statistics

Threads
132,307
Posts
1,865,712
Members
96,895
Latest member
EGDinSD
Top