Any interest in 4wd front coilovers to replace tbars?

[Atomic]

Just recieved some more material to make more of these, so if anyone wants to try it ill have some ready to ship next week!

 

[02TahoeSS]

Do you have a website? How do I order a set?

 

[Atomic]

Pm me here

 

[CAResearch]

pm me here

ygm

 

[Atomic]

Wanted to update this thread to say I have some different upper mounts in the works to hopefully account for lifted guys. This should also work for guys wanting to go lower than can currently without doing the stud upper mount. I hope to have some test fit this week!

 

[Tahoewhat]

Im interested in this-

Finally going to have time to start messing with mine and fine tuning it.

 

[Physh1]

Wanted to update this thread to say I have some different upper mounts in the works to hopefully account for lifted guys. This should also work for guys wanting to go lower than can currently without doing the stud upper mount. I hope to have some test fit this week!

Im interested too...I'm headed out of town for a week at the end of the month but when I get back it'll be time to tear into the front suspension.

Cameron

 

[Atomic]

Ok so I got the new new uppers in and tacked them together to mock up. Literally moved it as far over as I could. It gained approximately 3/4" of an inch more clearance from the UCA and raises the mounting point 3/4" from using the procomp adapter. The only bad thing is these will not work with the factory shocks, so if you decided to go back to stock you will need to remove these first. These should let lowered guys use the next size up in shock, or go approximately 1.5" lower.





I dont have them fully welded yet or powdercoated, but hope to by the end of the week. I would really like someone that has a 6" lift to test these before I order more to make sure they work. I only bought enough to make 3 sets. PM me if you have a 6" lift and want to try them, and Ill give you a discount

 

[Atomic]

Pretty much finished the new upper brackets. I have one more set on hand and it will be a couple weeks before I can have more material cut. I have some of the older styles on hand that use the procomp adapter, and actually thats what I still use. The newer style would be for lifted or slammed setups only.

 

[Physh1]

How much for the new uppers? I'll take a set...pm me...

Cameron