Anyone got barn doors and can check something for me real quick?

[dkknaebel]

I got that leak still happening in the left rear corner even after the roof rack delete. Looking at LMC for weatherstripping and I see this part, number 25. I don't have that. Does anyone with barn doors have it? If so, what year? Thanks in advance guys.

https://www.lmctruck.com/1992-99-chevy-gmc/exterior-rubber/csd-1992-99-exterior-rubber-components

 

[haks310]

Will check once i'm off work, 45 mins.
Says it fits Blazer/Tahoe 92-99 so wouldn't think model year matters.

 

[Tonyrodz]

That's the weather strip in the upper corner. Do you have a gap in that corner where the upper gasket meets the gasket going down the side? Or is it just metal exposed?
Could just be flattened from age too, allowing water to get through.

 

[dkknaebel]

That's the weather strip in the upper corner. Do you have a gap in that corner where the upper gasket meets the gasket going down the side? Or is it just metal exposed?View attachment 246010 View attachment 246011
Could just be flattened from age too, allowing water to get through.

I have the flat piece that runs east west and then the surround a little lower. There is a flat metal edge about 1/2" long on either side of the east west piece. I wonder if cleaning the gasket and all the stuff we've done has left a gap that wasn't previously smooshed and now I got intrusion?

 

[Tonyrodz]

I have the flat piece that runs east west and then the surround a little lower. There is a flat metal edge about 1/2" long on either side of the east west piece. I wonder if cleaning the gasket and all the stuff we've done has left a gap that wasn't previously smooshed and now I got intrusion?

Gaskets loose their flexibility over time--they just go flat, letting air and water get through. Maybe you can put some thing under it to bring it up some--other just replace it and be done with it--looks cheap enough.

 

[dkknaebel]

Gaskets loose their flexibility over time--they just go flat, letting air and water get through. Maybe you can put some thing under it to bring it up some--other just replace it and be done with it--looks cheap enough.

Might just replace. Just need to figure out which pieces I need.

 

[dkknaebel]

Will check once i'm off work, 45 mins.
Says it fits Blazer/Tahoe 92-99 so wouldn't think model year matters.

Thanks @haks310

 

[liquify33]

Let me know if you need different angle/area.

 

[dkknaebel]

Let me know if you need different angle/area.

View attachment 246091 View attachment 246092

Can you take a pic of the upper passenger side? Hate to be a pain but I want to figure out if I need that one corner piece, LMC shows one needed on the right side, against the body to the right of the long east west piece

 

[liquify33]

Can you take a pic of the upper passenger side? Hate to be a pain but I want to figure out if I need that one corner piece, LMC shows one needed on the right side, against the body to the right of the long east west piece

Will do in the daylight