Looking to get my dad a set of mud flaps (splash guards according to GM) for his 2013 Denali. I ordered a set from GM Parts Giant (part number 19212180) but they won't fit because his truck has the factory non-powered running boards and these hit the boards. GM says that all of the options have been discontinued now and don't offer pictures anymore so I can't see what I would be looking for. I am hoping someone has the right part number so I can search ebay for a NOS set otherwise I will need to pull the ones off my truck and see if they have a number on them.
Anyone know the OEM mud flap part number?
- Thread starter Noggles
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Charlie207
Full Access Member
I know it's not what you're exactly looking for, but....
I'm pretty sure that a 2013 Yukon Denali (not Denali XL?) has the same running boards as my 2014 Yukon SLT, and I've found that the Husky mudflaps fit well, and are fairly benign in looks. They are easy to find, and not expensive either, and I know several other members here have them installed with similarly positive results.
huskyliners.com
The fronts have the molded relief to allow for tight fit with the factory running boards.
I'm pretty sure that a 2013 Yukon Denali (not Denali XL?) has the same running boards as my 2014 Yukon SLT, and I've found that the Husky mudflaps fit well, and are fairly benign in looks. They are easy to find, and not expensive either, and I know several other members here have them installed with similarly positive results.
2013 GMC Yukon Husky Liners® Mud Guards | Husky Liners
Browse Husky Liners’s Husky Liners® Mud Guards for the 2013 GMC Yukon, backed by industry-leading support and fast and free shipping to the contiguous United States. Contact our knowledgeable staff for specific product inquiries.
The fronts have the molded relief to allow for tight fit with the factory running boards.
swathdiver
Full Access Member
For my 2009 Yukon XL SLT, not a Denali, it has 19212819 front splash guards and 19212824 rear splash guards with the GMC logo. These were the latest design that had a piece of rubber between the splash guard and body of vehicle to protect the paint. I cannot say with certainty that the rears will fit a Yukon Denali but provided photos for you to decide. GMPartsDirect doesn't seem to distinguish between body lengths or trim levels. I do know that they don't fit powered running boards.
A few years later I did this project again with my 2013 pickup. Had to buy several sets off of Ebay to get the right ones. At least they were inexpensive.
They've been on the truck now for almost 5 years and are holding up great. No more sand or standing water on my running boards.
GM also made these painted with the body color. Mine match the running boards.
Thanks for the help! Yours look exactly like the ones on my SLT and are what he is looking for. I bought him what look to be the same rears but they are part number 17802160 which GM says was replaced by 19212822 but you have a different part number yet lol. I assume the wheelbase doesn't matter because the shapes are the same but it is GM we are talking about here.
I looked up your front number and they are discontinued and also show a different shape than what you have. This is all really confusing and I am about to just get him Huskys or Weathertech and call it a day lol.
swathdiver
Full Access Member
I feel for ya, went through the same thing for two of my trucks. Some of the part numbers are for painted. Some are for flat and you can paint them, some are for pebbled, some have GMC or Chevrolet logo and some of those have colored logos!
I didn't like the aftermarket ones at all and so I made the effort to discover which was correct.
Ok, so on those two part numbers you posted, they are all valid. They even check out as working for a Yukon Denali on GMPartsGiant. Like I said earlier, the last design had that piece of rubber to protect the paint. There is a grainy picture of 19212822 and it looks to have it too. Part numbers could change because of a design change but more often than not, a vendor change.
I forgot about vendor changes causing part number changes. I bet these same flaps have been made by like 5 different places lol.
I appreciate the help and the numbers. Gives me something to look for going forward since I was running out of options to search for.
I appreciate the help and the numbers. Gives me something to look for going forward since I was running out of options to search for.
the husky's fit and work fine, a number of us have them and have had them on for years and years, they are oem or better quality and work well.
I have had mine on for at least 6 years or more.
gm changed the fender design in 2007 and it now slings mud up to the windows, the husky's put a stop to that nonsense
