Anyone try to program modules lately?

[TrybalRage]

So I have a clone/china made Tech2 and an MDI2 that I bought a few years ago, to do my own diagnostics and pass-through programming when needed. At the time I was basically told by the ACDelco TDS people that the Tech2 wasn't supported (they were still doing some kind of bypass on demand at the time which they don't do anymore) so I picked up the MDI as well to use...

I successfully programmed with it in the past and it went into the toolbox drawer until now (even though the system only recognized it as a MDI, NOT an MDI2... still worked).

Logged into the ACDelco TDS site in anticipation of probably needing to program a new power window switch that's on it's way, and they very prominently warn against using clone tools at the top of their page.



So now I'm worried about even trying... not sure how they could tell if I do or not.

Anyone try to use one of their knockoff tools lately?

 

[Doubeleive]

So I have a clone/china made Tech2 and an MDI2 that I bought a few years ago, to do my own diagnostics and pass-through programming when needed. At the time I was basically told by the ACDelco TDS people that the Tech2 wasn't supported (they were still doing some kind of bypass on demand at the time which they don't do anymore) so I picked up the MDI as well to use...

I successfully programmed with it in the past and it went into the toolbox drawer until now (even though the system only recognized it as a MDI, NOT an MDI2... still worked).

Logged into the ACDelco TDS site in anticipation of probably needing to program a new power window switch that's on it's way, and they very prominently warn against using clone tools at the top of their page.

View attachment 446185

So now I'm worried about even trying... not sure how they could tell if I do or not.

Anyone try to use one of their knockoff tools lately?

if you plug in the mdi and it is able to update with the bosch software then you are probably ok, you need to do that 1st anyway otherwise it won't work period.
the message above is what you "could" run into, if you get the message then stop at that point, then if need be grab a 3rd party device instead.
I used my clone mdi 2-3 months ago and had no problems

 

[Doubeleive]

also you gotta kinda wonder how many people are out there working under the assumption that there mdi is a genuine one and it's not? there has to be some leeway in there as far getting your account locked, one would assume it's not a automatic thing

 

[swathdiver]

So I have a clone/china made Tech2 and an MDI2 that I bought a few years ago, to do my own diagnostics and pass-through programming when needed. At the time I was basically told by the ACDelco TDS people that the Tech2 wasn't supported (they were still doing some kind of bypass on demand at the time which they don't do anymore) so I picked up the MDI as well to use...

I successfully programmed with it in the past and it went into the toolbox drawer until now (even though the system only recognized it as a MDI, NOT an MDI2... still worked).

Logged into the ACDelco TDS site in anticipation of probably needing to program a new power window switch that's on it's way, and they very prominently warn against using clone tools at the top of their page.

View attachment 446185

So now I'm worried about even trying... not sure how they could tell if I do or not.

Anyone try to use one of their knockoff tools lately?

I did in November. Saw the same messages.

I think I updated the software off of Bosch's website first, before logging on.

Some time back, I was under the mistaken impression that I had bought an MDI2. What I received was an MDI in MDI2 clothes.

There's a video on Youtube from 11 months ago of a guy using the Tech-2 again to program modules.

 

[j91z28d1]

if it's just the little rocker switch for the window. those don't need programed. I've swapped mine. if it's the module, probably.


instead of different the clone stuff, I always try to bring up the OBDxpro GT to flash gm modules. heard about it from a post on here. got one and it's solid, no worries about if gm will accept it or not. for the price I'm happy I got it.