Backup/360° Camera Issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

GTPprix

Supporting Member
Joined
Feb 8, 2014
Posts
635
Reaction score
42
Location
Metro Detroit, MI
So my right side camera was going out quite a bit. Finally got a chance to look at the codes and its either the camera module or the VPM. Replaced the camera today hoping it not the VPM as thats a pain to remove; we shall see!
 

penncage

TYF Newbie
Joined
Dec 6, 2023
Posts
2
Reaction score
0
2022 Yukon XL with ~15k mi, same issue - cameras crapped out a couple of days ago. I have an appointment with the dealer tomorrow. Mentioned the TSB, they were aware of it but surprised my 360 cameras were also not working.

I will update on the resolution.
Dealer inspected for issues with wiring and found none. They think the VPM was corrupted and replaced it. Cameras work now.

BTW- our issue was a complete camera failure, not intermittent.
 

GTPprix

Supporting Member
Joined
Feb 8, 2014
Posts
635
Reaction score
42
Location
Metro Detroit, MI
Happy to report (and hopefully I dont jinx it) that my side camera replacement has indeed corrected my issue. Pretty simple as well!
 

viven44

Senior Member
Joined
Sep 9, 2024
Posts
134
Reaction score
209
Location
Dallas, TX
Hi all, just wanted to report that on our 2024 Suburban Z71 -- after about 600 miles we had the same problem

- 360 degree button or camera button on screen had no effect when pressed
- Putting vehicle in reverse showed the error shown in the original post

Took it to the dealer. Dealer replaced Module 87816606 - Video processing module which looks to be a >$600 OE part and of course my guess is this part needs to be reprogrammed by dealer to accept the VIN of the vehicle. (Just a wild guess someone with more knowledge can confirm).

That has corrected the issue.

Scared about the future we are heading to with all the computer modules in these newer trucks
 

contenderv07

TYF Newbie
Joined
Feb 25, 2020
Posts
14
Reaction score
12
Hi all, just wanted to report that on our 2024 Suburban Z71 -- after about 600 miles we had the same problem

- 360 degree button or camera button on screen had no effect when pressed
- Putting vehicle in reverse showed the error shown in the original post

Took it to the dealer. Dealer replaced Module 87816606 - Video processing module which looks to be a >$600 OE part and of course my guess is this part needs to be reprogrammed by dealer to accept the VIN of the vehicle. (Just a wild guess someone with more knowledge can confirm).

That has corrected the issue.

Scared about the future we are headiing
same here. We just got a Yukon AT4 with less than 300 miles on it and have this error. Have you had any issues since?
 

stels22

TYF Newbie
Joined
Oct 22, 2024
Posts
1
Reaction score
0
Приобрел Z71 23 года выпуска около месяца назад, и у меня периодически возникают проблемы с камерой заднего вида/360°, когда она не работает, может быть, раз в несколько дней. Я выключил зажигание и снова включил его, но это не помогает. После простоя в течение 20-30 минут все работает. У кого-нибудь еще есть такая проблема? Я знаю, что дилер исправит это по гарантии, но я бы предпочел не оставаться без машины ни дня, если есть простой сброс/исправление.

View attachment 390201
Такая же проблема, оказался заводской брак, разъем на видеомодуле не был припаян.
 

Attachments

  • PXL_20241227_075423120.jpg
    PXL_20241227_075423120.jpg
    296.9 KB · Views: 3

Forum statistics

Threads
132,818
Posts
1,874,808
Members
97,679
Latest member
twotimesthamadnes
Top