Belltech Lowering Kit

[nysmedic]

Just had the kit installed and the black steelie's put on.

Belltech Lowering Kit #739
The front was ~35" before the drop
The rear was ~38" before the drop

Now they both sit around 34"

Very smooth and handles much better.

Before and after pictures are below.

Also the roof rack was removed and fasteners were put in the remaining holes. Very flush and keeps the water out.

 

[Goodinblack]

You look like popo.

You have spindles or struts up front?

 

[NathanJax]

Definitely looks like PoPo.

 

[07Burb]

I like that!!

 

[Hersheybear]

What kind of "fasteners" did u use on roof rack holes

 

[nysmedic]

Black, I believe spindlers, I did not personally do the installation.
The company did and posted these pictures.

Hershey, these are the fastners. http://www.summitracing.com/parts/rnb-799-135
When I took the roof rack off, there are 10 holes and they fit perfectly into them. I didnt even have to use silicone and they are all water tight.

 

[Jmat]

You could easily pull someone over with that rig, I like it. Downside... I'd imagine folks will now slow down & do the speed limit when they see you coming in the rear view...

 

[babamerino]

Where did u get those steelies???

 

[nysmedic]

baba, got the steelies off of ebay.

This website has them but they are very expensive...http://www.hubcaphaven.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=HC&Category_Code=2592

Also if you look around google / ebay, you can find them.

 

[babamerino]

baba, got the steelies off of ebay.

This website has them but they are very expensive...http://www.hubcaphaven.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=HC&Category_Code=2592

Also if you look around google / ebay, you can find them.

Thanks!!! I just plastidipped my stock 17s but those look way better!!!