Best headlights

[YukonXL04]

Yea. Even though your housings are fixed, the should have 2 or 3 screws on the back behind the projector to adjust the beam. Have you checked? It's a pain to pull the housing, turn the screw, and put back in for each adjustment.

 

[massivespl]

Yea the screws just spin and spin. They never did adjust anything since the day I got them. U get what you pay for lol.

 

[nharkey85]

Yea. Even though your housings are fixed, the should have 2 or 3 screws on the back behind the projector to adjust the beam. Have you checked? It's a pain to pull the housing, turn the screw, and put back in for each adjustment.

This. Had a coworker who's denali headlights were like this.

 

[mooman]

What do you have in yours? I have Tl and MH1's in my yukon lights. Love it.

To the op. Definitely go with the retrofit.View media item 23981
That's just my tl low beams.

I have the Mini H1's. Awesome lighting with a small tweak to the cut-off plate.

 

[massivespl]

I bought some black DEPO projector headlights. And some black corner lights. I'll do a before and after photos when they come in.

 

[05Single]

I was looking at those depos too at first but I'm doing a retrofit instead. Pita but worth it in the end. No aftermarket projector light will even come close to a retrofit. Buy clear housing for $60 and some matchbox bi-xenons for $50.
You might be able to buy the depos and tune them and replace the lens with a higher quality. Or swap out the bowl. But I'm not sure.

 

[massivespl]

Old headlights ^



New headlights ^

 

[massivespl]

Old vs new

 

[massivespl]

The worst thing is the gap under the headlight. What do you guys do to close that gap up?

 

[Fosscore]

Biased. They look good. I think you should color match your bow tie to your wheels so that your grille pops a bit more and ties in the lower valance. Have a gap on mine too. Left it alone and dealt with it, which is very hard to do. The new look overshadowed the little discrepancy.