clemson01
Full Access Member
- Joined
- Apr 27, 2014
- Posts
- 101
- Reaction score
- 5
Hey guys
Ok I have a kenwood aftermarket HU and replaced all the bose crap, I also have 3 kicker 12s and 4 kicker 6x9s I have two amps in the back. the 4 6x9s are powered by one of the amps and the kicker door speakers I recently installed are going to the HU which also goes to the bose amp and subwoofer. I do have the harness for the door chimes and all behind the HU. But I am getting feedback only through the door speakers when volume is at 0 and I think it's bc of the bose amp. Is there anyway I can disable the amp or cut the power lead to the amp. I have looked under the console and seen the plug for the amp . I didn't want to have to rerun all new lines to each door. I want the HU to power the door speakers. Any help will be much appreciated thanks again
Sent from my SM-N910V using Tapatalk
Ok I have a kenwood aftermarket HU and replaced all the bose crap, I also have 3 kicker 12s and 4 kicker 6x9s I have two amps in the back. the 4 6x9s are powered by one of the amps and the kicker door speakers I recently installed are going to the HU which also goes to the bose amp and subwoofer. I do have the harness for the door chimes and all behind the HU. But I am getting feedback only through the door speakers when volume is at 0 and I think it's bc of the bose amp. Is there anyway I can disable the amp or cut the power lead to the amp. I have looked under the console and seen the plug for the amp . I didn't want to have to rerun all new lines to each door. I want the HU to power the door speakers. Any help will be much appreciated thanks again
Sent from my SM-N910V using Tapatalk