CB radio install on a 07-14 tahoe?

[Slurpglass]

Got the illumination lights on the switches hooked up! Lol. Still trying to decide on a mounting location for the CB antenna. Going to use a hood mount for the interim, until I can custom fab a rear bumper mounting bracket.

 

[89Suburban]

That looks ***** sweet dawg.

 

[Wolfbraid]

Once upon a time I had one of these in my car.
https://www.cobra.com/products/c75wxst
Worked pretty well as far as I remember, it's in a box somewhere, one day I'll put it in something again.

 

[Slurpglass]

Had to add some 1/8” rubber edge protector to keep the high pitched chafing to a minimum. 3’ was enough for the front and back. It also doubles to fill the gap in the front restricting the red illumination lights on the switches from shining through. Still welding up a rear hatch antenna mount, so all the CB stuff still in the works.





Sent from my iPhone using Tapatalk

 

[Slurpglass]

Got the CB antenna mounted finally. Had to make a custom 1/8” steel bracket that supports it from underneath the bumper & behind the tail light. I’m pleased with the final result. Now to run the 18’ coax.









Sent from my iPhone using Tapatalk

 

[89Suburban]

Awesome.

 

[Slurpglass]

Awesome.

I agree. My main goal was to mount the 4’ antenna under the roofline, so it would still be garage accessible.


Sent from my iPhone using Tapatalk

 

[Fless]

You'll want to keep the top (load) of the antenna as high above the metal roofline as possible to avoid SWR issues.

 

[Slurpglass]

You'll want to keep the top (load) of the antenna as high above the metal roofline as possible to avoid SWR issues.

I’m aware, I haven’t tuned it yet, so we’ll see where it ends up as it sits. Expect an update once tuned


Sent from my iPhone using Tapatalk

 

[2010gmcyukon]

Tram NH-4-HC

How's your reception with that antenna? Any SWR issues?