Check out my new PPV build

[signguy62]

this page has all the info you need, from what I remember its mostly red wires and a few red/white, the yellow plug with 2 wires is for the airbag in the seat.

2007 - 2014 GM Chevy Truck & SUV Seat Wiring & Memory Bypass

Schematics & Pin Configurations for a Memory Bypass & Heat Setup on the 2007-2014 (NNBS) Chevy GM Seats.

www.oemcarandtruckseats.com

Yeah, thanks for those pin outs. But I have no idea what I'm looking at when it comes to those. I'm just going to cut the chassis side plug off in my truck and match wire color, wire for wire to the chassis side harness pigtails I cut from the seat donor vehicle.

 

[signguy62]

 

[signguy62]

Just gonna do my best to splice these into my trucks chassis harness for the seats.

 

[signguy62]

this page has all the info you need, from what I remember its mostly red wires and a few red/white, the yellow plug with 2 wires is for the airbag in the seat.

2007 - 2014 GM Chevy Truck & SUV Seat Wiring & Memory Bypass

Schematics & Pin Configurations for a Memory Bypass & Heat Setup on the 2007-2014 (NNBS) Chevy GM Seats.

www.oemcarandtruckseats.com

Thanks for the info. I ended up following the one video from YouTube. Just followed his directions and basically just matched up wire to wire by color. Got all the basic power seat functions up and running. Thanks again for the assistance.

 

[Jimgeorge]

I have heard alot about that, I will be looking into it for sure

It’s cheap and easy. Use the marks on the backside to guide you when cutting the rectangular hole for the DIC switch. Panel snaps in and out but you have to take almost all of it except for the passenger AC vent. Superglue it in place.