Cluster, Radio, HVAC LED Swap Polarity Info.

[grnphrog]

I needed the same info and was excited to find this, but I'm stumped now... This diagram shows the solder points being next to each other (Left to Right, East to West, what ever orientation you want to use) but my radio has them being North/South (Up/Down, Top/Bottom) orientation.

With that being said... I found some LED's with the resistor 'built in'. Anyone heard of that before?
Here is the ebay link: http://www.ebay.com/itm/111855442605?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT

 

[Randy Stamps]

Do you have polarity diagram for lights, 4WD, fog light, and air bag modules?

 

[SnowDrifter]

Thanks for posting!

Are those hot spots as bad as they appear in the pictures or are they just a camera artifact?

Would you post a link to the exact LEDs you used?

Edit wow dates are difficult

 

[SnowDrifter]

Do you have polarity diagram for lights, 4WD, fog light, and air bag modules?

If you can get the plug on there with the thing disassembled tou should be able to check it with a multi meter.

 

[toddis32]

No need for resistors. 12 volt LED cubes are available with built in resistor. There are 4 kits with the instructions and polarity diagrams for each dash module. https://www.ebay.com/str/gmgaugerepair/LED-Whole-Dash-4pc-Combo-Kits/_i.html?_storecat=7463993017

 

[Mezzo]

If you manage to figure out the diagram for the heated seat controls for 03-06 I would be so happy,thats the only one one i havent figured out yet

 

[toddis32]

If you manage to figure out the diagram for the heated seat controls for 03-06 I would be so happy,thats the only one one i havent figured out yet

I've been told you mount 1 LED in one direction and the next LED is mounted the opposite way. So alternate them.

 

[toddis32]

Do you have polarity diagram for lights, 4WD, fog light, and air bag modules?

This kit includes the LED's with built in resistor and the polarity diagram: https://www.ebay.com/str/gmgaugerepair/LED-Left-Dash-Switches-Kits/_i.html?_storecat=5523315017

 

[toddis32]

I needed the same info and was excited to find this, but I'm stumped now... This diagram shows the solder points being next to each other (Left to Right, East to West, what ever orientation you want to use) but my radio has them being North/South (Up/Down, Top/Bottom) orientation.

With that being said... I found some LED's with the resistor 'built in'. Anyone heard of that before?
Here is the ebay link: http://www.ebay.com/itm/111855442605?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT

You can get the 12 volt cubes with built in resistors in 3mm cubes here: https://www.ebay.com/str/gmgaugerepair/12-volt-LED-Bulk-Sales-3-mm/_i.html?_storecat=23349650017

The 5mm for the speedo are here: https://www.ebay.com/str/gmgaugerepair/12-volt-LED-Bulk-Sales-5-mm/_i.html?_storecat=23349651017

The previous link is not working any more.

 

[05Single]

@Thatsquishykid717 check out the cubes