OhFourChevy
Full Access Member
My cutoff is pretty jacked on one side, I'll take pictures at some point, but has anyone ever removed the cutoff shield and replaced it with a straight cutoff shield?
Cutoff mod for Depo Projector
- Thread starter OhFourChevy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You don't want a straight cutoff. You want the cutoff to have a step shape to it. So you can set the left side to not blind oncoming traffic, and the right side of the step will aim a little higher to help light signs and such.
View media item 23992 see the step
OP
OP
OhFourChevy
Full Access Member
Yeah the step I'm fine with, mine look jacked up though, do they not? Pic is from a distance of like 20 feet or so, and I'm on a downslope, but the cutoff and the hot spot of my lights are what's causing me concern as well as my cutoff pattern is a bit different than what I've seen of everyone elses
OP
OP
OhFourChevy
Full Access Member
Am I not aiming them properly? I'm a newb to projectors and HID
The right projector looks about right for depos... the left projector the hotspot is off. Check to make sure your bulb is installed right. Looks like it's angled, therefore messing with your hotspot.
If you want more and better, then swap for some mini h1s or d2s...
If you want more and better, then swap for some mini h1s or d2s...
OP
OP
OhFourChevy
Full Access Member
Correct. Though I believe it's not as bad on depo lights as it is opening stockers up and cutting and epoxy like you would normally do.
@OhFourChevy A couple questions. First I realize this thread is roughly 15 months old. MY projectors looks just like his do. I contacted the retrofit source a few mins ago. Did you ever go through with this or just deal with the DEPO? Also what is that front bumper?
@YukonXL04 How would LEDs work in the DEPO projectors?
@YukonXL04 How would LEDs work in the DEPO projectors?
Lots of people have done leds and claim to be happy. Never messed with them. Depo's are pretty sub par in terms of projectors.
