Did '01 and '02 Yukon Denalis come standard with G80?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

robnarley

TYF Newbie
Joined
Jul 2, 2020
Posts
24
Reaction score
18
Location
North GA
I'm shopping around online for a replacement rear axle and trying to figure out what all vehicles I can pull from without having to see the sticker in the glovebox. I think the G80 rear axle (locking) was done away with the 2003 Yukon Denalis onward, but it was at least available on the 2001 and 2002 models. Does anyone know if it was a standard option during those two years?
 
OP
OP
robnarley

robnarley

TYF Newbie
Joined
Jul 2, 2020
Posts
24
Reaction score
18
Location
North GA
All of the '01 and '02 Denalis I've come across so far have been 3.73. Sellers always advertise the ratio, but often times leave out whether it's a locker or not. And trying to get a large salvage yard to confirm something like that over the phone is almost as hard as getting water out of an oil spout.
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,688
Reaction score
10,603
My 08 Yukon XL Denali has the G80 rear end OEM, with 3:42 gears.
 

Tahoeyukondenali

TYF Newbie
Joined
Jun 30, 2022
Posts
14
Reaction score
3
My 2000 is G80 3.73's, 2002 G80 3.73's, 05 G80 4.10's, but my 05 Silverado is G80 3.42's. And finally my 08 Denali 6.2L is All-wheel drive all together different bird no hi/lo in transfer case it is actually another differential technically
 

Forum statistics

Threads
133,412
Posts
1,885,060
Members
98,534
Latest member
ADO450r

Latest posts

Top