DIY Alignment 07 Tahoe 4WD

[B-train]

That is an awesome setup! Thanks for sharing. I like the folded plastic sheeting for the toe adjustment.

 

[Trey Hardy]

thats not the only hard wood in this thread



"atleast this side isnt as fugged up as the other side..."

Passenger side was straight just about driver side was fuked up lol toed way out

 

[89Suburban]

Passenger side was straight just about driver side was fuked up lol toed way out

I would think with the lift you have and the large wheel diameters you could run 2 tape measures directly across the rim spokes and use that as a measurement.

 

[Trey Hardy]

I would think with the lift you have and the large wheel diameters you could run 2 tape measures directly across the rim spokes and use that as a measurement.

I haven’t thought about that I do have 2” spacers up front also though
I got the driver side pretty straight before I drove it to the shop but I never messed with the camber again those dirt king cam plates are a ***** to adjust but once their dialed in good their awesome but my normal alignment guy hates them lol

 

[89Suburban]

I haven’t thought about that I do have 2” spacers up front also though
I got the driver side pretty straight before I drove it to the shop but I never messed with the camber again those dirt king cam plates are a ***** to adjust but once their dialed in good their awesome but my normal alignment guy hates them lol

How were your other angles? Did he give you a print out?

 

[Trey Hardy]

How were your other angles? Did he give you a print out?

I’m picking her up after lunch

 

[89Suburban]

@1:19:15 NASCAR checking front to rear toe with a straight edge in the pit stall