DJM A Arms

[k9lovr]

Thanks all for the info.

How much do the belltech and DJM spindles push the wheels out?

Decisions...Decisions...

---------- Post added at 06:51 AM ---------- Previous post was at 06:35 AM ----------

Also 2" is the most I want to go with in the front. Should I just consider the drop struts instead? Is it just a matter of installing a new strut? Thanks

 

[NORCAL SS]

Thanks all for the info.

How much do the belltech and DJM spindles push the wheels out?

Decisions...Decisions...

---------- Post added at 06:51 AM ---------- Previous post was at 06:35 AM ----------

Also 2" is the most I want to go with in the front. Should I just consider the drop struts instead? Is it just a matter of installing a new strut? Thanks

you can just install the strut yes if you have high miles on the truck that would be a good option also.

 

[k9lovr]

I currently have 41K on the truck, and know I will need new shocks eventually. I was planning on just doing them all at the same time though. Do you have positive opinions on the struts in terms of ride as well as durability?

---------- Post added at 11:46 AM ---------- Previous post was at 11:44 AM ----------

What would be the price for the front strut kit with the belltech rear kit as well as new rear bell tech shocks? Thanks

 

[NORCAL SS]

Ill shoot you a pm

 

[k9lovr]

Pardon my ignorance but how do drop struts actually drop the front and maintain a good ride quality with out replacing the springs as well. Thanks.

---------- Post added at 12:49 PM ---------- Previous post was at 12:04 PM ----------

Have there been any issues with alignments with the drop struts installed? Thank you all for you info and patience

 

[NORCAL SS]

here you go this will show yah.
http://docs.belltech.com/25003-888Version2.pdf

 

[06whitess]

Tony, are these modified (A Arms) like they setup you had done on the TBSS's? I can vouch for Tony, being a former TBSS guy, having bought things from him before. Very Standup, and he really does answer the phone 24/7. I think I called him at like 5 am his time to ask questions on a saturday morning.....

 

[NORCAL SS]

No these bolt right in.

The tbss a arms I modify myself and DJM will just tell you to buy the tbss arms off of me due to the modifications I do.

 

[k9lovr]

Thanks tony, after reading thru the instructions it is indicated that some vehicles may not be able to get back factory alignment with out additional parts. Have you found this to be the case with Tahoes? I have new tires and do not want to wear them out due to alignment issues.

 

[NORCAL SS]

with drop struts mated to drop spinldes you need the belltech alignment bushings. ie drop strut at 1 inch drop plus spindles for 2 inch drop 3 inch drop total get the belltech alignment cams. Since your only doing a 2 inch drop (same as if you did a 2 inch drop spring) you will be fine.