DJM Sway Bar Link and LCA Relocation Kit Doesn't Fit

[Racerbox77]

I'm having the same issue with the Rk2000 DJM kit. Doesn't fit good and the drivers side axle bushing bracket is hitting the sway bar not allowing it to be bolted to the end link. I could probably put the truck on the ground and get it to bolt up. Makes no sense.
Not impressed with their customer service at all.

 

[NardDog]

Resurrecting this one. I have just finished installing the belt tech relocation tabs for the shocks and belt tech springs. I also installed these same end links from DJ M. I’m having no issues installing these. They clear both sides without having to relocate the sway bar over to the passenger side. I’m worried because things never go this smooth. I haven’t driven it yet, so hopefully once I get done driving and things will still Clear. By the way, it’s a 2~34 drop.

 

[NardDog]

Pics

 

[MarKist]

I did mine in in 2020 and I never had a problem, everything from belltech and DJM bolted right up, I did install a spohn adjustable panhard bar tho

 

[Rocket Man]

DJM’s instructions were messed up for the RK2000 kit and I remember discussing that with them. They admitted it and were going to change it but after 2 years of me bugging them they never did. I’m not sure if those in the link are correct or not but my suggestion is to take them with a grain of salt and mess around with the parts until they fit. The RK2007 links are different as well as the instructions. I just did my 07 Tahoe with no issues.