Don's 1992 GMC Yukon 2 door project ZFG

[yates ™]

I am so confused, and yea I would love a bagged setup but the Big truck is taking all my funds so maybe in a couple years haha

Move the "Big Truck" to a daily and a start bagging this

 

[Donnie Yukonie]

Move the "Big Truck" to a daily and a start bagging this

If I ever get if out of that shop... maybe but bagging a 4x4 is not a favored choice because of the nightmare to make it work and look good.

Got some new wheels for it , and fixed more crap on it

 

[Donnie Yukonie]

Ok small update to the beater, Picked up a passenger side door for it since the one on the truck has a good size dent at the bottom. , Also got a set of fender flares for it , noticed the top one has been shaved for some reason. but you don't notice it mocked up to the truck. Also decided I'm going to slap the 4 doors old running boards on it as well. Been busy lately so I haven't had a chance to really put any of it on or get any farther with the resto body work. more to come later

 

[Donnie Yukonie]

Been a while since I posted sorry , had some health issues over the past couple months (gall bladder removed) and some bad luck but all is well now ... well much better atlas.

Lot of things happened to both trucks.

The factory radio finally shelled out so I went and bought a auto zone special and put it in, Still haven't got the delete pocket , keep forgetting

Some of the bad news , windy day + blown window shocks = broken rear window.




Also tried out some NBS Silverado wheels for a little ,




well I really wanted to do something about that ugly two tone plasti-dip / green top the P/O had done, After I took off the dip I uncovered some pretty half ass body work and some hidden rust so out came the sander and aircraft stripper. because the truck was riddled with tiny rust spots all over and some big around the wheel wells and quarters I replaced the drivers side fender and bought a couple patch panels and took the whole truck down to bare metal. I also replaced the passenger door

 

[Donnie Yukonie]

Put black primer down and sealed it with a grey primer for now . I replaced the tail lights with the euro lights want it to look as close to stock as possible. also added newer style mirrors and newer saw blades that added some shine. got two issues in the body I want to fix still but probably going with Atlantis blue metallic macco job and call it done.

 

[95escahoe]

Looking good


Sent from my iPhone using Tapatalk

 

[Fosscore]

Nice work man.

 

[05Single]

Nice progress

 

[Donnie Yukonie]

Thanks guys, Also forgot to mention it has a chrome rear bumper as well now instead of the black one

 

[jerryjoe28]

looking good man!