eldercaddy
TYF Newbie
- Joined
- Dec 19, 2010
- Posts
- 3
- Reaction score
- 0
Doors sagging
- Thread starter 99denali
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
970Tahoe
Full Access Member
Here you go guys...it really isn't that hard to do, unless you are lanky like I am and can hold the door by yourself, you will need a buddy to hold it up while you drive out the pins
Here's a write-up...http://www.gmfullsize.com/forum/showthread.php?t=83809
Here's a write-up...http://www.gmfullsize.com/forum/showthread.php?t=83809
99Yuk
Full Access Member
How much they are selling it? Need to know. Thanks.
If I remember correctly, they were around $5 each. You will need two kits per door. Each kit has one pin and two bushings and a washer. Mine were Dorman/Help! part#38416.
