Yes I do, I bought it off amazon for $15. I have it wired to a switch instead of the reverse because I don't always use it, and it is nice to be able to use it when the truck isn't in reverse.
Last edited:
Dylan's 1997 GMC Yukon
- Thread starter _Dylan_
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yes I do, I bought it off amazon for $15. I have it wired to a switch instead of the reverse because I don't always use it, and it is nice to be able to use it when the truck isn't in reverse.
I built a new subwoofer box today, 3/4" MDF.
60" wide X 18" deep X 14" tall. 6 cubic feet, ported with 3 4" X 11" PVC pipes. One layer of R13 fiberglass insulation along the bottom.
I was using 2 10" Rockford Fosgate HX2 subwoofers on a 40amp (500watts RMS) Kenwood amplifier. About a week ago on a whim I bought 2 12" Dual SD12 subwoofers from walmart to put in a box in the house hooked up to the stereo. They slam pretty hard for a $30 speaker! So, I bought 2 more and took the 2 out of the house and put them in my truck. Shit bangs in the ported box with only 500 watts. I'd like to get a new amp for a full 700 watts RMS.
washed, waxed, and polished last weekend
Hey! 4x8 sheets fit in a yukon!
cutting and stuff
test fit
95% done
All it needs is something to cover the wood! I am going to put some type of vinyl to match the trim cover over it some time this summer...
I'll try to take a video tomorrow.
60" wide X 18" deep X 14" tall. 6 cubic feet, ported with 3 4" X 11" PVC pipes. One layer of R13 fiberglass insulation along the bottom.
I was using 2 10" Rockford Fosgate HX2 subwoofers on a 40amp (500watts RMS) Kenwood amplifier. About a week ago on a whim I bought 2 12" Dual SD12 subwoofers from walmart to put in a box in the house hooked up to the stereo. They slam pretty hard for a $30 speaker!
So, I bought 2 more and took the 2 out of the house and put them in my truck. Shit bangs in the ported box with only 500 watts. I'd like to get a new amp for a full 700 watts RMS. washed, waxed, and polished last weekend
Hey! 4x8 sheets fit in a yukon!
cutting and stuff
test fit
95% done
All it needs is something to cover the wood! I am going to put some type of vinyl to match the trim cover over it some time this summer...
I'll try to take a video tomorrow.
new wheels
18" wheels off a 2012 nissan titan-$100
255/65R18 Goodyear forenzas with half tread mounted and balanced $240
new lug nuts $35
they don't stick out
---------- Post added at 11:02 AM ---------- Previous post was at 10:33 AM ----------
my 1947 gmc emblem arrived in the mail today
18" wheels off a 2012 nissan titan-$100
255/65R18 Goodyear forenzas with half tread mounted and balanced $240
new lug nuts $35
they don't stick out
---------- Post added at 11:02 AM ---------- Previous post was at 10:33 AM ----------
my 1947 gmc emblem arrived in the mail today
AtomicHoe094
Atomichoe094
im diggin the rims, look nice and cheap!
noJeepshere
Full Access Member
Yeah they look good on it, fit the truck, not too flashy.
And I love that emblem.
And I love that emblem.
Thanks, I think they look good. I'm trying to keep a factory look to the whole truck.
I got that sucker on ebay for $30, I just have to figure out a way to mount it. I might have to buy a new grille.
ChrisAU
Full Access Member
Get a chrome grill insert and attach it to that...would look awesome IMO, and I don't even like chrome.
I finally got the rusted hitch out that was stuck solid in the receiver.
Made some new valve stem caps out of some .45 shells
I also made a blue LED light for the exhaust. Its kinda ricey but I like it.
The short term plans right now are fender assist mirrors; LED retrofits into the brake lights, corner, and parking lights; H3 bulb retrofit into the reverse lights; and the 1947 GMC grille emblem.
Still have to install the 3/4 drop kit.
Made some new valve stem caps out of some .45 shells
I also made a blue LED light for the exhaust. Its kinda ricey but I like it.
The short term plans right now are fender assist mirrors; LED retrofits into the brake lights, corner, and parking lights; H3 bulb retrofit into the reverse lights; and the 1947 GMC grille emblem.
Still have to install the 3/4 drop kit.
Last edited:
