Fob won’t unlock, possible BCM issue?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TomH91

TYF Newbie
Joined
Feb 21, 2022
Posts
20
Reaction score
15
Started having some odd things happen with the key fob, door key and locks recently. They may not be related. Yet, I wonder if any of this points to a failing BCM. 2003 Suburban 2500 LT with power locks and a remote lock/unlock fob. Bought it in Nov 2023 and had no issues until Thanksgiving week 2024.

1. The key fob stopped unlocking the doors remotely. I replaced the fob battery, then tried a backup fob. No joy. Both fobs will lock the doors remotely, though.

2. At the same time, the door key stopped unlocking the driver door from the outside. For a while, it would unlock the door if I’d locked the doors from the interior door lock button as I got out, but it wouldn’t unlock the door if locked from the fob. Before long, the key stopped working the driver’s door lock at all. It still usually unlocks the passenger door. The backup key, less worn, is no better.

I figured these were separate issues until….

3. I took a call today as I pulled into a parking lot. I stayed in the truck. The doors are set to unlock automatically when Park is selected, and I re-locked the doors from the power lock button with the engine off. I chatted a while. When I ended the call, the doors wouldn’t unlock from the inside using the power lock button. It was like the door locks were disabled when the retained accessory power timed out. It shouldn’t do that, right?
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
12,412
Reaction score
25,338
Location
Elev 5,280
Help me understand -- when you say that the door key stopped unlocking the driver door, do you mean that it wouldn't turn the cylinder? Or that the key would turn but the latch wouldn't unlock the door?

If it would turn the cylinder but wouldn't unlock the door, either the short linkage that goes from the cylinder to the door latch has come out of the plastic retainers, or the door latch itself is defective. I suspect the latter or a poor electrical connection. I think that the lock mechanism from the cylinder is mechanical, though. You may have more issues than that.

Probably looks something like this inside the door panel (the open - in the pic - yellow plastic latch on the right is the bottom link to the door handle; the round yellow one hidden behind it goes to the lock cylinder linkage, red plastic at the top):

Driver's door latch inside.jpg

From Rock Auto:
Capture.JPG
 
Last edited:

Forum statistics

Threads
133,154
Posts
1,880,722
Members
98,173
Latest member
steelersallday30

Latest posts

Top