OP
OP
Fosscore
Full Access Member
- Joined
- Apr 16, 2014
- Posts
- 10,529
- Reaction score
- 18,284
Fosscore's 2006 Tahoe Build Thread
- Thread starter Fosscore
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Fosscore
Full Access Member
- Joined
- Apr 16, 2014
- Posts
- 10,529
- Reaction score
- 18,284
Thx man. Lower? Pretty happy with the stance now, but that would be pretty sick. At least wth the roads here it could be done.
to me its perfect as is and if it were mine the only thing I could see to do next to it is some form of air ride
BADRIDES
Full Access Member
- Joined
- Dec 18, 2015
- Posts
- 1,735
- Reaction score
- 1,149
Very nice
OP
OP
Fosscore
Full Access Member
- Joined
- Apr 16, 2014
- Posts
- 10,529
- Reaction score
- 18,284
Thx sir. Work in progress.
OP
OP
Fosscore
Full Access Member
- Joined
- Apr 16, 2014
- Posts
- 10,529
- Reaction score
- 18,284
I hit the engine bay with 2 rounds of Simple Green the other night to break up the dirt and grime. it rinsed out pretty clean. Got in there today with a healthy dose of 303 for shine as I had some extra in my shed.
I followed ezdaar's thread to make sure I had all the necessary areas covered before letting the hose loose under the hood. I did not use a pressure washer this time, but it wasn't bad enough to need it honestly. The gun on the hose was plenty strong to do what I needed. His write up is straightforward and very easy to follow. Now just get in there and do it. It sure makes a world of difference.
http://www.tahoeyukonforum.com/threads/cleaning-your-engine-bay.72806/
Looks pretty good, save a few spots of surface rust and oxidation, e.g. alternator and bolt heads.
I hit the surface rust down on the frame with some rattle can paint just to even it out and took off a few bolts and painted them on the side. Needs some more love, but this was a good start and looks a lot better than it did the other day.
Just continuing to detail in different areas. The only problem with that detail eye is that you notice any little imperfection or area that needs attention and makes that work list grow a bit more.
I followed ezdaar's thread to make sure I had all the necessary areas covered before letting the hose loose under the hood. I did not use a pressure washer this time, but it wasn't bad enough to need it honestly. The gun on the hose was plenty strong to do what I needed. His write up is straightforward and very easy to follow. Now just get in there and do it. It sure makes a world of difference.
http://www.tahoeyukonforum.com/threads/cleaning-your-engine-bay.72806/
Looks pretty good, save a few spots of surface rust and oxidation, e.g. alternator and bolt heads.
I hit the surface rust down on the frame with some rattle can paint just to even it out and took off a few bolts and painted them on the side. Needs some more love, but this was a good start and looks a lot better than it did the other day.
Just continuing to detail in different areas. The only problem with that detail eye is that you notice any little imperfection or area that needs attention and makes that work list grow a bit more.
OP
OP
Fosscore
Full Access Member
- Joined
- Apr 16, 2014
- Posts
- 10,529
- Reaction score
- 18,284
Thx man.
OP
OP
Fosscore
Full Access Member
- Joined
- Apr 16, 2014
- Posts
- 10,529
- Reaction score
- 18,284
blurred
Full Access Member
Look at that new hood...
Been debating on the HD hood or going with the ZL1 styled hood personally
Been debating on the HD hood or going with the ZL1 styled hood personally
