Getting the Ride Back

[bub]

Tony what are the differences between my djm TB springs and the ones Max just put in?

 

[Nickleahy23]

so tony, which springs did i get with my kit? Hopefully the belltech tb springs lol..glad its back to a good ride max

 

[NORCAL SS]

no the kit i had on the site is the djm tb spring which ive been using for a while. With the belltech rear spring the truck will bottom out more with helper bags in both cases will not.

but due to the size/winding of the djm tb spring it handles loads a lot better.

and the new design tb spring from belltech has been out for a while and ive been using it just the rear is a lot lower and you need to drop the front at least 4 inches to match. Im the one who told max about the new design spring last week

 

[Nickleahy23]

no the kit i had on the site is the djm tb spring which ive been using for a while. With the belltech rear spring the truck will bottom out more with helper bags in both cases will not.

but due to the size/winding of the djm tb spring it handles loads a lot better.

and the new design tb spring from belltech has been out for a while and ive been using it just the rear is a lot lower and you need to drop the front at least 4 inches to match. Im the one who told max about the new design spring last week

gotcha...

 

[bub]

any better shots yet max? still rolling the 30" tires?

 

[Max]

Too busy enjoying the ride and getting it sideways again, I'll try to get some pics tomorrow when it rains all over my nice clean truck.

 

[bub]

sounds good man. grab some fender measurements as well.

 

[NORCAL SS]

Too busy enjoying the ride and getting it sideways again, I'll try to get some pics tomorrow when it rains all over my nice clean truck.

yank ptb3600 stall with 4.10s

do that it will 60 foot hard!!

 

[Max]

sounds good man. grab some fender measurements as well.

30.5" up front and 31.5" out back with about 15psi in the bags. I can air it out and drop it to 31" at 5psi but it rides better with more pressure in the bags. I think I'm gonna run a slightly taller tire with the 22s so hopefully it doesn't rub.

 

[NORCAL SS]

my customers with the replica 22x9s and 285 35 22 and bagged in the rear there is no rubbing issues. Just like I worked with FR on the original tbss 22x9 for 2 1/2 years i helped spec the offset for the newer trucks also when they went into production of the wheel for the 6x5.5 bolt pattern.