Ghost Shadow Door Kit installed with pic

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ponchonutty

Full Access Member
Joined
Sep 1, 2013
Posts
560
Reaction score
69
Location
New Washington, Ohio
Well, I was bored and grabbed 2 sets of these from one of my suppliers. Install wasn't too bad. I ended up grabbing power from the dome light + wire at the BCM. I used a relay to isolate it though because the lights wouldn't come on right away when you opened a door.

Popped off the door panel
20130922_172433_zps019a7742.jpg

Marking off panel
20130922_172437_zps3ddeb71d.jpg

Kit used
20130922_172441_zps75b231b3.jpg

Comes complete with drill
20130922_172451_zpsf1ffe73c.jpg

Not sure if any of you have done anything like this but I love my home made tool. It's a 3' long zip tie used on ducts. Cut off the "zip" and drill 2-4 small holes in the end and now you have the ultimate fishing tool. No worries of poking holes into things you don't want to.
20130922_173704_zps8947b002.jpg

Zip tie fished through door boot.
20130922_173858_zps478b843f.jpg

Projector installed in door
20130922_175408_zpsddf9d6d2.jpg

Finished project.
20130922_194107_zps55baf27c.jpg
 

OklaHemi

Member
Joined
Mar 31, 2011
Posts
62
Reaction score
0
Those wouldn't make sense on my Tahoe.... I kid, I kid. Those looke phenomenal
 

Forum statistics

Threads
132,762
Posts
1,873,786
Members
97,592
Latest member
shadowid60
Top