Good grease gun?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

99-02nut

TYF Newbie
Joined
Mar 27, 2023
Posts
3
Reaction score
0

Alex_M

Full Access Member
Joined
Sep 27, 2021
Posts
376
Reaction score
678
What type of grease you use also has an effect on how much it leaks. I notice more sweat from red grease vs a thick moly lithium grease for example. This will also vary some brand of brand.

Y'all with your fancy grease guns are wild. I just go grab the cheapie pistol grip jobber from Rural King.
 

Alex_M

Full Access Member
Joined
Sep 27, 2021
Posts
376
Reaction score
678
I use red anywhere I expect to see water - slip yokes are a good example. Moly lithium most other places such as ball joints, wheel bearings, etc. Cheap grease anywhere frequently serviced, anywhere I apply by hand such as when used for an anti-corrosive, to lube seals as an assembly aid, etc. At the end of the day, any grease is better than no fresh grease.
 

bill1013

Full Access Member
Joined
Jul 7, 2020
Posts
454
Reaction score
977
Location
Waianae, Hawaii
My Alemite guns are 30+ years old and always work. They sweat and drip a little if stored too hot such as back of truck with shell in summer. I have a bucket with funnel,cartridges, and different tips for 3 guns.
I have to agree that Alemite makes quality products and customer service is exceptional.
 

randeez

Full Access Member
Joined
Sep 29, 2017
Posts
7,444
Reaction score
23,678
Location
south florida
:shrug:
grabbed one of these a couple weeks back, mostly because i had some needle zerks that require one hand pushing on it, cant pump with other single hand. have only used it with needle tip but so far so good. a little tip leakage

71jd+Z3wIbL.jpg
 

Forum statistics

Threads
132,308
Posts
1,865,731
Members
96,897
Latest member
Trin
Top