Got my 2010 PPV

[GCATX]

Nope, that was one of the first mods.

If you want the sexy Stainless tips, I bought the kit similar to the SLP kit, bit didn't use it. I'd let it go cheap since you're local

Did taking out the rear resonator make much difference in sound? Does this kit replace the resonator? If so, I will take it, if first guy doesn't.

 

[1BADI5]

Did taking out the rear resonator make much difference in sound? Does this kit replace the resonator? If so, I will take it, if first guy doesn't.

Not much louder......makes it sound like you have the 6.2 in the Esky/Denali.

Yes, you cut the resonator out and install this. I opened the box, but never used it

 

[The_Burban]

For custom work I'd tell you to contact Wits End Fab in Hanover, MD. Ask for Kenny and let him know I sent you Jeremy aka 1BADI5.

Good dude and they do great work

Just looking for a Setina push bumper preferably. It's be cool to do a steel bumper but that is far away.

I just don't know where all the decommissioned cop cars go and their parts. Saw a guy on eBay selling off an MSP Tahoe.. but no push bumper.

 

[Kee Fuller]

Do I need an airhorn......nope, but do I want one to **** with people that are to busy texting and driving...... absolutely

View attachment 237825 View attachment 237826 View attachment 237827

Thats what mine is for.

 

[1BADI5]

Thats what mine is for.

Great minds think alike

 

[1BADI5]

Well been a productive few hours of bummin around in the garage.

- Wiring harness and switch for airhorn installed.
- New headlight switch for OEM foglights in
- When I took the old head light switch out it was loose......so I had to repair a broken tab with some spare plastic I had on hand for RC trucks.

I'll see what else I can get done before the sun drops

 

[mainecrab]

Clean ass PPV

 

[1BADI5]

Clean ass PPV

Thank you...... trying to keep it tasteful

 

[1BADI5]

I got some more work done last night

Foglights in...... waiting for the pigtails to pin out the fuse block

And the airhorn is in and working well

 

[1BADI5]

I chose to use the worm clamps to install the horn and compressor so I can remove it quick......and not holes needed to be drilled