Came from upstate NY........ no surprises there. If the test fit works, I will buy new stuff.
Got my 2010 PPV
- Thread starter 1BADI5
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Came from upstate NY........ no surprises there. If the test fit works, I will buy new stuff.
Well after the underdrive pulley install I was tired of the guessing game on the size of an AC belt (stupid ass slip belts). So I took a note from the old school LS motors. A belt with its own tensioner.
Parts numbers:
Dayco auto tensioner - 89258
Dayco belt - 5040345
Dorman flanged bolts - M10-1.5x35mm (2)
And I have AC again and all it good. Plus no more ****** around with stretch belts. One 15mm socket, one 3/8 ratchet and I can replace both belts in under 10 mins
Parts numbers:
Dayco auto tensioner - 89258
Dayco belt - 5040345
Dorman flanged bolts - M10-1.5x35mm (2)
And I have AC again and all it good. Plus no more ****** around with stretch belts. One 15mm socket, one 3/8 ratchet and I can replace both belts in under 10 mins
There's already threaded holes in the block for the tensoiner?
Sent from my SM-G973U using Tapatalk
Yes, the threaded holes are already there; actually on the AC compressor bracket.
Peacock
Full Access Member
Hey we keep the parts places in business up here, never ending battle trying to stay ahead of salt damage.
Well I bought the Morimoto LED projector foglights for my PPV. Here are my initial thoughts.....
Pros: look cool as hell and have a nice feel to them
Cons: the connector to the foglight harness was incorrectly wired. They would not fire up. So I bench tested them and......SOB they had them in reverse polarity. So I had cut/shave the connectors so I could flip them.
I have taken all of the pictures and will contact The Retrofit store where I bought them and see what they have to say or do. I'm a reasonable guy and I understand shit happens......maybe to one connector....but both. They have a problem in the QC department. If it was some cheap china shit.....OK, it was cheap. BUT no, I paid over $200 for these mofos; it should be plug and play gents.
More to follow, in the mean time here are some pictures. I only hope the light output is equal to or better then my previous set up.....cheap china replacement housings and some Amazon LED bulbs. If not.....these ****** are going back.
Pros: look cool as hell and have a nice feel to them
Cons: the connector to the foglight harness was incorrectly wired. They would not fire up. So I bench tested them and......SOB they had them in reverse polarity. So I had cut/shave the connectors so I could flip them.
I have taken all of the pictures and will contact The Retrofit store where I bought them and see what they have to say or do. I'm a reasonable guy and I understand shit happens......maybe to one connector....but both. They have a problem in the QC department. If it was some cheap china shit.....OK, it was cheap. BUT no, I paid over $200 for these mofos; it should be plug and play gents.
More to follow, in the mean time here are some pictures. I only hope the light output is equal to or better then my previous set up.....cheap china replacement housings and some Amazon LED bulbs. If not.....these ****** are going back.
Tonyrodz
Resident Resident
Lol, you ok dude? They do look good tho. Fit appears good also.
