Got the CCM Level Kit installed

[CleanSweep]

I got the kit installed last night. Seems like it sits a lot higher than I expected. Glad I didn't go with the 3.5 Rough Country Lift.

Mods:
CCM 2.5/1" leveling kit.
Bilstein 5100's on all corners.
Moog Z71 replacement springs on all corners.
Nitto Trail Grappler 295/55r20 tires

I did Bilsteins because of the good reviews here and I needed to replace the smoothride suspension in order to lift.

I'll try to get better pics later after I clean it.

You can see the trimming I had done to it in this pic.

 

[CleanSweep]

Did some measurement and it sits at around 40.5 inches on all 4 fenders.
More pics:

 

[Zed 71]

Looks good. Did you have to trim the running boards?

 

[CleanSweep]

Looks good. Did you have to trim the running boards?

Yes, I had to trim them even to the metal. I'm thinking of getting some Nfab nerf bars but, I'm not sure how close to the wheel well they get.

 

[NathanJax]

Nice!!!

 

[Sho'Tyme]

Love that color

 

[Neil Layne]

i have the nfab bars and a 2.25/1.5" lift with 295/55/20 trail grapplers just like yours and i did not have to touch them. how expensive did those shocks cost you? I'm thinking about doing that soon, it looks like it sits higher than mine. it looks great. if you were thinking about those running boards i would recommend them, i love them a lot.

 

[CleanSweep]

i have the nfab bars and a 2.25/1.5" lift with 295/55/20 trail grapplers just like yours and i did not have to touch them. how expensive did those shocks cost you? I'm thinking about doing that soon, it looks like it sits higher than mine. it looks great. if you were thinking about those running boards i would recommend them, i love them a lot.

The reason I had to do any trimming was because of the -12 offset of my wheels. Do you have a pic of how far the nerf bars come to the wheel well in the front?

Shocks were $363 for all 4 from Shock Warehouse but beware, they might not have anything in stock and might make you wait forever. I got lucky only had to wait a few weeks. The Moog springs were around 140 for all give or take a few bucks. How high is the center of your fenders off the ground? The reason mine may look higher than yours could be because of the Z71 springs.

 

[phattire]

Looks good!

 

[Zed 71]

Yes, I had to trim them even to the metal. I'm thinking of getting some Nfab nerf bars but, I'm not sure how close to the wheel well they get.

FYI you might have been able to avoid that by adjusting the caster.