Headlight Adjusting Screws and Related Parts

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Alberta Tahoe

Full Access Member
Joined
Apr 25, 2015
Posts
160
Reaction score
33
Hey All.
I'm in need of the headlight adjusting mechanisms for my 03 Tahoe (looks to be the same as my 06 as well).
The plastic inserts have split and the threads stripped. Some worse than others.
Looking online at the parts I think I need and I'm informed that they are not compatible with the Tahoe.
Does anybody have a link to the right bits and pieces?
Thanks in advance.
 

Attachments

  • IMG_20220917_145908836_HDR.jpg
    IMG_20220917_145908836_HDR.jpg
    284.9 KB · Views: 13
  • IMG_20220917_145943660_HDR.jpg
    IMG_20220917_145943660_HDR.jpg
    218.6 KB · Views: 12
  • IMG_20220917_150030649.jpg
    IMG_20220917_150030649.jpg
    237 KB · Views: 13
  • s-l500.jpg
    s-l500.jpg
    21.7 KB · Views: 12

BatsTDK

Full Access Member
Joined
Apr 7, 2016
Posts
300
Reaction score
272
Location
Orange County, CA
Seems you need to be looking for part number 16524772. Take those "fitment guides" on various sites like Amazon and Autozone with a grain of salt. They're often wrong.
 
OP
OP
A

Alberta Tahoe

Full Access Member
Joined
Apr 25, 2015
Posts
160
Reaction score
33
Thanks for the PN.
As for Amazon being wrong...say it isn't so!
It used to be my job to find information. Now it's to sift through the overload.
Thanks again.
 

S33k3r

Full Access Member
Joined
Aug 14, 2017
Posts
2,533
Reaction score
3,513
Location
Dallas, Texas
I have about a 1/2 dozen headlight frames -- the plastic ones -- for GMT800s I acquired when I bought someone out. I didn't think that was what you were looking for, which is why I refrained from chiming in.
 
OP
OP
A

Alberta Tahoe

Full Access Member
Joined
Apr 25, 2015
Posts
160
Reaction score
33
Here's the thing I've found in my research.
I can buy a single headlight adjusting mechanism as posted above for about 80 bucks each. Two required per side.
Or I can buy an entire headlight assembly, with both adjusters for less than a hundred.
Am I missing something?
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
12,142
Reaction score
24,753
Location
Elev 5,280
Could be that aftermarket headlights have a different design of the adjusters, so you may need to use the whole assembly. (If you were thinking of swapping the adjusters over.)
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,490
Reaction score
39,847
Location
Stockton, Ca.
just go out to the local junkyard and grab some they can be found on practically any broken housing, they can be removed and should only be a few bucks at best
and yukon, tahoe, suburban, silverado, sierra, avalanche should all be the same adjuster for gmt800's
 
OP
OP
A

Alberta Tahoe

Full Access Member
Joined
Apr 25, 2015
Posts
160
Reaction score
33
That very well could be. And interestingly, the places that sell the assemblies don't appear to sell the adjusters.

The part in the picture is 90 bucks CAD. Can't tell if it's complete with adjusters though. But I suspect it is.

Headlight 1.jpg
Headlight 2.jpg
 
OP
OP
A

Alberta Tahoe

Full Access Member
Joined
Apr 25, 2015
Posts
160
Reaction score
33
just go out to the local junkyard and grab some they can be found on practically any broken housing, they can be removed and should only be a few bucks at best
and yukon, tahoe, suburban, silverado, sierra, avalanche should all be the same adjuster for gmt800's
The pick-a-parts here are few and far between (like one within 40 miles). And the pickings are slim at best as trucks are very much the dominate vehicles on the road.
Try buying a used Tahoe up here lately! The value of my two beaters (03 and 06) have doubled in the last two years!
 

Forum statistics

Threads
132,711
Posts
1,873,019
Members
97,532
Latest member
schimme
Top