help column shifter broken stuck in DRIVE gear

[gooffeyguy]

Well if he scraps it he won't have to worry about the drivers side A-pillar creating such a big blind spot anymore

Sent from my SM-G930V using Tapatalk

 

[BG1988]

so am i understanding your going to scrap it because you cant find a shift cable? they should be available at most parts stores.

it's a different part number..

the 4L60e/6L80 cable does not "fit"

 

[BG1988]

OK update I went under it and yes the bushing is broken it's hanging loose



Do i push up or down to put it in park??

 

[Doubeleive]

OK update I went under it and yes the bushing is broken it's hanging loose



Do i push up or down to put it in park??

I believe all the way forward is park, but it could be the opposite one or the other, you can fix it temporary with a zip tie and a washer

 

[bigdog9191999]

it's a different part number..

the 4L60e/6L80 cable does not "fit"

give the info on your truck and i am sure the guys here can find you something that will work. or your info on where you are and i am sure someone would gladly take the truck off your hands for such a minor issue.

 

[BG1988]

I believe all the way forward is park, but it could be the opposite one or the other, you can fix it temporary with a zip tie and a washer

got it in park ok..... I MacGyver a repair now it shifts like it should

using a washer and some metal wire (i did not have a zip tie on hand )




the pin lever looks like the one on the 4L60E


2LM70 is a beefed up 4L60E anyways.... as far as i know....


I have a spare washer and extra wire with me just in case...

 

[Doubeleive]

got it in park ok..... I MacGyver a repair now it shifts like it should

using a washer and some metal wire (i did not have a zip tie on hand )

View attachment 280621


the pin lever looks like the one on the 4L60E


2LM70 is a beefed up 4L60E anyways.... as far as i know....


I have a spare washer and extra wire with me just in case...

www.bushingfix.com

 

[BG1988]

www.bushingfix.com

Yes I get two so I can have both done at once ( if one failed most likely the other will fail also )

 

[89Suburban]

and if i can't get the parts for it... then take the tahoe to the salvage yard (i'm taking off the cats then scrap them though so i can get $$$$ for them)

got it in park ok..... I MacGyver a repair now it shifts like it should

using a washer and some metal wire (i did not have a zip tie on hand )

View attachment 280621


the pin lever looks like the one on the 4L60E


2LM70 is a beefed up 4L60E anyways.... as far as i know....


I have a spare washer and extra wire with me just in case...

 

[Rocket Man]

Another WTF Brent thread lmao. Or lame-o according to my buddy Jimmy. Which might actually be appropriate in this case.