Holley HI-Ram Intake manifold on 5.3

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Y

Yukon82291

Member
Joined
Mar 19, 2013
Posts
30
Reaction score
1
Location
Goffstown NH
its cable :( does an underdrive pulley make a difference? my dad has a 97 yukon with one but thats a 350, didnt know if they made a difference on ours
 

Big Buttons

The SS Burb
Supporting Member
Joined
Nov 10, 2010
Posts
3,479
Reaction score
36
Location
South Texas
A little more off the line power but not that much. It's also a little less rotating mass. For the price of the underdrive pulley you can swap to e-fans which would be better and add about the same amount of torque.
 

Z-56 Hoe

What do I do????
Joined
Jan 18, 2010
Posts
2,573
Reaction score
164
Location
Houston
Waste without a cam. Wont work on his 01 unless he is a rare one with drive by wire.

Sent from a jelly bean.


Jenn it works on my 2001 but I am drive by wire also and had to get the adpator from Texas Speed. I also have heads and cam too
 

FreshLikeOprah

Full Access Member
Joined
Mar 29, 2013
Posts
112
Reaction score
3
He can run a cable 90mm TB. Holley, Edelbrock, Nick Williams, all make TBs.

What cam you going with? Stall?

Go with a TBSS/NNBS intake. Cheaper and better. You will need to modify your rails, or use a 97/98 Vette fuel filter and the newer rails, and make spacers to use your injectors, or get harness adapters and run the newer ones.
 
Top