I installed E-fans on my 2001

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

YukonXL04

The Riverboat
Supporting Member
Joined
Sep 3, 2013
Posts
2,489
Reaction score
175
Location
Arlington, TX
Ls1fans.net has the pulley.

The factory harness will attach to the under hood fuse panel. Pretty sure you have to remove the fuse panel cover so you can access the power stud
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
I used ls1fans harness and overdrive alternator pulley with good results.
 

alacran

Full Access Member
Joined
Sep 29, 2010
Posts
226
Reaction score
7
Can someone put this in dummy terms. My head hurts (well not really lol). Yes I have used google.
I have a 01 tahoe and have the oem fans and harness. And i can't understand which wires and where they go to into the pcm? Thank you in advance

20170329_194052_zps48jhnlqm.jpg
 

kses123

kses123
Joined
Jul 7, 2009
Posts
736
Reaction score
45
Location
Raleigh, NC
Can someone put this in dummy terms. My head hurts (well not really lol). Yes I have used google.
I have a 01 tahoe and have the oem fans and harness. And i can't understand which wires and where they go to into the pcm? Thank you in advance

See the little black connector hanging by itself? It has two tiny wires in it, one blue and one green. Those are the two that go into the PCM.
 

bottomline2000

Full Access Member
Joined
Oct 21, 2009
Posts
1,722
Reaction score
988
Location
Dallas, TX
See the little black connector hanging by itself? It has two tiny wires in it, one blue and one green. Those are the two that go into the PCM.
Not on an 01. Blue wire to pcm, green wire will have to go to ac trigger. Have to tap the wire running from the compressor but u can access it like @ScottyBoy did. Makes for a clean install. Also have to wire in a relay for the ac trigger.

Sent from my SAMSUNG-SM-T377A using Tapatalk
 

alacran

Full Access Member
Joined
Sep 29, 2010
Posts
226
Reaction score
7
Not on an 01. Blue wire to pcm, green wire will have to go to ac trigger. Have to tap the wire running from the compressor but u can access it like @ScottyBoy did. Makes for a clean install. Also have to wire in a relay for the ac trigger.

Sent from my SAMSUNG-SM-T377A using Tapatalk
Ok thanks i just got the plug and pins from the junk yard. I need a tune after this correct
 

Forum statistics

Threads
132,400
Posts
1,867,439
Members
97,058
Latest member
dphi2602

Latest posts

Top