I've got a 3" body lift and thinking about 35's

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
100
Location
Near Philly
if you wheel the truck find a 14 bolt and build it, it just makes sense.

A 2" block and cranking teh front is a popular set up.
 

the big blue bus

Full Access Member
Joined
Apr 18, 2010
Posts
1,049
Reaction score
1
Location
richmond, va
have what you want on mine lol. 3inch bl and 2inch block with truck torison bars. stock gears for now and its no dog drives fine. when and if rear goes looking for 14sf and ergear to 4.88
 

bpr3ece

TYF Newbie
Joined
Dec 19, 2011
Posts
8
Reaction score
0
Location
Liberty Hill, Tx
I have a 98 4 door 4x4 with a 3" bl and I'm running 35"s on it without cranking or rear block, and I have stock gears. I'm about to build a 14 bolt and do a 4l80e and a black bear tune. I want to do the rough county 2-3 inch suspension lift so I can run 37's. But you can run 35's with stock gears and be fine. I'm getting 16mpg highway with mine and all I have is exhaust, not to mention my 5.7 vortec has 223,*** miles ( when it ***** out I'm doing a 6.0 swap )
 

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
100
Location
Near Philly
Brayden,

Please do yourself a favor and look more into that 2-3" lift....check this forum, gm fullsize, fullsize chevy, gmt400 and so on. From what I have read it is bad stuff. basically an expensive T bar crank. Spend a few extra bucks and get the 6" lift from RCX (same as the 4" but with an AAL), that is quality.

http://tahoeyukonforum.com/forum/showthread.php?t=27612
 

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
100
Location
Near Philly
My advice and I'm sure others would agree would be save up another $400 and do it right.
 

96GMCYukonGT

Full Access Member
Joined
Mar 13, 2011
Posts
166
Reaction score
2
ive got 35s on my 2dr with little crank and no blocks and no bodylift
 

bpr3ece

TYF Newbie
Joined
Dec 19, 2011
Posts
8
Reaction score
0
Location
Liberty Hill, Tx
Don't know if I believe the 35's with no lift....unless u cut the body a lot. My stock gears are 373, it seemed really odd to me but I get great gas mileage and my hoe has plenty of get and up go, and its basically stock.
 

Forum statistics

Threads
132,249
Posts
1,864,751
Members
96,799
Latest member
PistolPeteandDuda
Top