Just did LED dash replacement even 4wd select

[Vette66]

Just replaced ALL the lights with LEDs in the dash. Even the 4WD select that does not come apart. Snipped the bulbs off and it left stubs of the old bulbs. Soldered LEDs directly to these and found the Gray wire off the connector was power to the lights. Added a 330ohm resister and it worked great. So here are a few picks, also changed my radio to blue it has color changing built in.

For those that have asked you can't change the gear selector with out completely redoing it, each part is a separate LED. I checked today it would be a real pain.

 

[Vigh_J]

do mine next?

looks awesome nice work

 

[imi4tth3w]

holy fawk so much blue. i'd go insane at night. but if you like it then all to ya

i'd like to do the same with mine except in white

 

[Vette66]

Its a lot of blue but I think white LED's would be too bright. They dim but not evenly so controlling the bright white LED's might be a pain. I like the blue will see how I like it next month. If I don't like it I can always change them to something else, it only took a total of about a hour and a half.

 

[jomulk56]

There's another way to do the gear indicator....blue gel film. I've seen it used on a few cars and it turned out pretty good. One of them is a blue Mark VIII the guy converted to all blue leds.
Blue Gel Filter
http://www.amazon.com/gp/product/B004GE19II/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

 

[Vette66]

Just ordered a piece will see how it looks.

 

[YukonXL04]

Awesome. Looks great. This is on my to do list as well

 

[Tahoewhat]

Awesome looking. Its really nice when driving.

(all blue here as well, everything doors, dash, etc.)

 

[Hayden's Truck]

Looks great, Ive got some amber LEDs to put into my dash just haven't had the time to pull everything apart yet to do it. Going to try and do everything else in red to match my radio, amber should be bright not not as bad as white and the red will keep everything else toned down for night time driving. How much time did this take?

 

[Warrior14]

Can you give us a more detailed walk through of how you did this? Like where the grey wire was and stuff?