Key fob help on 2015 Yukon

[smittydog]

Ok, so I know how to set the entry/exit button on the drivers door, and I have it set to go to the exit position when I open the door (upon engine shut off and opening in the drivers door).

Now, here is the problem. When I use the keyless entry key fob (the new one-not last years model FOB), the drivers seat goes to a cattywampus setting. It moves the pedals all the way close, moves the seat 3/4 way up to steering wheel and sets the drivers mirror lower. (not the position #1 I use on the drivers door - nor the # 2 position either).

Does anyone know how to set the key FOB?

thanks,
Steve

 

[cr1084]

set the #2 memory to the same as #1. It appears to me that the key fob you are using aligns with the #2 setting, while the other key fob is for #1

 

[BirchyBoy]

set the #2 memory to the same as #1. It appears to me that the key fob you are using aligns with the #2 setting, while the other key fob is for #1

Or grab the fob marked "1", set your settings appropriately, and let the other drive use the "2" fob and settings.

 

[cr1084]

or do that. strange they don't mark the fobs as 1 and 2 like other manufacturers do.

 

[smittydog]

holy crap...your right. I used the other key FOB and it was the # 1 setting. So, that means my GF set the seat up for #1 when she used it the other night. Have to reprogram that. She not going to be driving it much. I can set one for city mode and one for highway mode (couch with heat).

I love this thing...

Thanks everyone