Keyless entry

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Aug 24, 2022
Posts
52
Reaction score
64
I have the window sticker for my 2001 Tahoe, it shows that it has “programmable locks”.

I am assuming that means it has Keyless Entry.

My in-laws did not get key fobs when they bought it new, so not 100% sure.

So I got a fob for it, but when I tried to get it into programming mode, I can’t get it to work.

Is there a quick way to look at either the fuse panel in the engine bay ir the drivers side to see if it’s actually equipped for it?

I have found that the receiver is in the dash behind the instrument cluster, but don’t want to dig that deep into it yet.

Any suggestions?
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
12,143
Reaction score
24,753
Location
Elev 5,280
See if your RPO codes in the glovebox include "AU0"; that's the code for it in my '04.
 
OP
OP
01BlueTahoeGuy
Joined
Aug 24, 2022
Posts
52
Reaction score
64
I will look at the RPO codes and see.

There currently a few other electrical gremlins I need to look at, headlight switch isn’t working, the ac clutch won’t engage and the rear speakers won’t work.

Not too bad for a 20 year old rig really, I have seen a lot worse
 

S33k3r

Full Access Member
Joined
Aug 14, 2017
Posts
2,533
Reaction score
3,513
Location
Dallas, Texas
I will look at the RPO codes and see.

There currently a few other electrical gremlins I need to look at, headlight switch isn’t working, the ac clutch won’t engage and the rear speakers won’t work.

Not too bad for a 20 year old rig really, I have seen a lot worse
Experience tells me the headlight switch is probably dirty; you can take it apart, carefully and clean it. If you have another truck, borrow it's switch and check. Good luck on the other stuff!
 

BatsTDK

Full Access Member
Joined
Apr 7, 2016
Posts
300
Reaction score
272
Location
Orange County, CA
Are you having trouble getting the truck into programming mode, or trouble with the fob itself?

If you have an 01, make sure you have the correct fob. It should have “lock” and “unlock” words on the buttons, NOT lock symbols. Those are for 03-06 models.
 
OP
OP
01BlueTahoeGuy
Joined
Aug 24, 2022
Posts
52
Reaction score
64
I can’t get the rig to go into the “Program” mode to program the fob.

I don’t see AU0 on the RPO sticker.

Here is a photo of the RPO sticker as well a the drivers side fuse block.

From what I see, I don’t think it’s equipped with Keyless Entry. 40B399EF-D489-43EA-B38B-F49009020CAD.jpeg4C39D53C-A931-4D82-B075-23A6E3087131.jpeg
 
OP
OP
01BlueTahoeGuy
Joined
Aug 24, 2022
Posts
52
Reaction score
64
Decoded the RPO tag.


AE7 SEAT,FRT SPLIT,EASY ENTRY

AJ1 GLASS,DEEP TINT(REAR SIDE WINDOWS AND REAR DOOR WINDOW)

AXP VIN IDENT POSITION, MULTI- PURPOSE VEHICLE

C49 DEFOGGER,REAR WINDOW,ELECTRIC

C60 AIR CONDITIONER,FRONT,MANUAL CONTROLS

C7K GVW RATING 6500 LBS

DE2 MIRROR,OUTSIDE,LH & RH,DIRECT CONTROL,FOLDING,PAINTED

EVA TEST DVT, EVAP EMISSION REQUIREMENT

FE9 FEDERAL EMISSION CERTIFICATION

FF6 ARM,TORSION BAR SPRING ADJUST,LH

FF7 ARM,TORSION BAR SPRING ADJUST,RH

GU6 AXLE,REAR,3.42 RATIO

JAN PLANT CODE - JANESVILLE, WI, BOC

JC5 BRAKE VAC POWER, 4 WHL DISC, 7,200 LBS

KG8 GENERATOR 130 AMP

K34 CRUISE CONTROL,AUTOMATIC,ELECTRONIC

LR4 ENGINE GAS, 8 CYL, 4.8L, MFI

M30 TRANSMISSION,AUTOMATIC 4 SPEED,4L60E,ELECTRONIC

NF2 EMISSION SYSTEM,FEDERAL,TIER 1

QNK TIRE ALL P245/75R16 BW R/PE ST TL ALS 109S

R9H

SLM

UM7 RADIO,AM/FM STEREO,ETR,CLOCK

UQ5 SPEAKER SYSTEM,4,DUAL FRONT DOOR MOUNTED,DUAL EXTENDED RANGE QUARTER MOUNTED

UY7 TRAILER WIRING,7 WIRE,2 LEAD FRONT HARNESS,5 LEAD REAR HARNESS

VB3 BUMPER,REAR STEP,INCLUDES IMPACT STRIP(CHROME)

VG3 STRIP,FRONT BUMPER IMPACT

VP6 NOISE LEVEL CONTROL

VXS

V54 CARRIER,ROOF LUGGAGE(PAINTED)

V73 VEHICLE STATEMENT - US/CANADA

XNK TIRE FRONT P245/75R16 BW R/PE ST TL ALS 109S

X88 MARKET BRAND CHEVROLET

YD3 AXLE FRONT (BASE EQUIP) FOR SCHEDULING GVW PLATE

YD6 SPRING,REAR(BASE EQUIPMENT)

YNK TIRE REAR P245/75R16 BW R/PE ST TL ALS 109S

ZNK TIRE SPARE P245/75R16 BW R/PE ST TL ALS 109S

ZQ1 CHASSIS PACKAGE SMOOTH RIDE

ZW9 BASE BODY OR CHASSIS

ZY1 COLOR COMBINATION SOLID

1SA SALES PACKAGE

1SZ PACKAGE OPTION

12I INTERIOR TRIM GRAPHITE

12V TRIM COMBINATION VINYL, GRAPHITE (V) (99)

39U EXTERIOR COLOR,PRIMARY,BLUE METALLIC

6XK SPRING COMPTR SELECT FRT LH

7XK COMPONENT FRT RH COMPUTER SEL SUSP (7XK)

9X5 FRONT HIGH BACK BUCKET SEAT(CLOTH TRIM)

https://rparts-sites.s3.amazonaws.com/dec399b0838336997484042ed2af1004/design/rpoCodes.pdf
 

BatsTDK

Full Access Member
Joined
Apr 7, 2016
Posts
300
Reaction score
272
Location
Orange County, CA
Just to confirm, are these the instructions you’re following?

 
OP
OP
01BlueTahoeGuy
Joined
Aug 24, 2022
Posts
52
Reaction score
64
Yes, I have tried multiple times using directions, but could not get into tje programming mode .
 

Forum statistics

Threads
132,713
Posts
1,873,069
Members
97,536
Latest member
BigBodyBurban
Top