LED Flasher

[Ninety5PoloZ]

Anyone know where to get an LED flasher for a '97 thaoe? I know I got one for my F4i a few years ago, but I don't know how many prong the tahoes are, or even where the flasher is LOL

I googled a little bit, but if someone can help me out I'd appreciate it.

BTW I don't want to run load equalizers, I hate those things

---------- Post added at 12:47 PM ---------- Previous post was at 12:41 PM ----------

I looked up what park its suppost to be and it lists a 2, 3, and 4 prong flasher LOL anyone know which one it takes

 

[haks310]

Look by your parking brake...Should be a circuit board looking thing next to it, look for a little square box that says Hazard/Turn flasher. Local parts store should carry electronic flashers or you can order it from superbrightleds

 

[Ninety5PoloZ]

Look by your parking brake...Should be a circuit board looking thing next to it, look for a little square box that says Hazard/Turn flasher. Local parts store should carry electronic flashers or you can order it from superbrightleds

Yup I found it, its the 4 prong one. Now I just have to order it

Thanks

 

[haks310]

No problem. Autozone should have it, I know Kragen does.

 

[gulleyman]

I went to NAPA and asked for an "Electronic Flasher Module" and they had one for $15 but they said it was the same one as stock.
Am I missing something here? What is the difference for the one that works with LED's?

 

[SunlitComet]

Gulley I think ares are already the electronic control type so its timing is not afected by power load.

 

[gulleyman]

Sweeet, I'll try it tomorrow...or maybe next week, don't want to break off any frozen plastic pieces lol

 

[99Yuk]

Stock trucks are not electronic. You will definately need a new one to stop the flashing of a million times a minute.

I had posted up the flasher part number of mine HERE previously. IIRC it was EM29. And when done the dash signal lights will both stay lit up when the lights are on, but otherwise function ok. I just left mine like that.

I'd go back and buy that $15 part from Napa. I'll bet it would work ok.

 

[SunlitComet]

I say this because our 96's factory diagrams are wired with 4 terminals and the 4 terminal is the electronic one according to several websites. I even removed a rear turn bulb with no kind of thermal timing effects so what am I missing?

 

[qukon 95]

you will need one for the hazards or you will have hyper flash
when you have the lights on. part # ep29 from superbrights.