LED fog lights 2009 Yukon Denali
- Thread starter Ezzzzy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
t.stimpson
Full Access Member
- Joined
- Nov 16, 2010
- Posts
- 227
- Reaction score
- 25
Nice. Where did you get them?
BlackOh7on22s
Full Access Member
Sub'd for info
RebelXL
Member
this is the exact replacement I'v been looking for. I'd also be interested to know where you got them.
Thank you in advance.
Thank you in advance.
VA929RR
Full Access Member
- Joined
- Mar 26, 2015
- Posts
- 107
- Reaction score
- 8
Ditto
OneTwo
Full Access Member
I also need this info.
Sorry for the delay guys.
The bulbs that I ordered are from a company called OPT7. The cruddy part about their setup is that I had to go through a bunch of modification to the bulb because the 5202 adapter was the wrong height to work on the OEM fog light housing.
I would not recommend going the route I did but I didnt want to throw $80 out the door so I made it work by cutting up the OEM bulbs and using those as my connection to the fog light housing.
Something like this looks like it would work perfectly.
The only thing I would caution is that they are BRIGHT! Super bright. As in twice as bright as the stock halogen headlight bulbs. So, if you are planning on driving around with them on while there is oncoming traffic it may not be the mod for you.
Here is a picture of the difference in connection height. The aftermarket bulb would not seat correctly into the OEM housing. I tried to cut an 1/8" off but it wasnt perfect when I was done so I cut up the OEM bulb and epoxied the connector to the led light. OEM bulb connector attached to the LED light is on the left.
The bulbs that I ordered are from a company called OPT7. The cruddy part about their setup is that I had to go through a bunch of modification to the bulb because the 5202 adapter was the wrong height to work on the OEM fog light housing.
I would not recommend going the route I did but I didnt want to throw $80 out the door so I made it work by cutting up the OEM bulbs and using those as my connection to the fog light housing.
Something like this looks like it would work perfectly.
The only thing I would caution is that they are BRIGHT! Super bright. As in twice as bright as the stock halogen headlight bulbs. So, if you are planning on driving around with them on while there is oncoming traffic it may not be the mod for you.
Here is a picture of the difference in connection height. The aftermarket bulb would not seat correctly into the OEM housing. I tried to cut an 1/8" off but it wasnt perfect when I was done so I cut up the OEM bulb and epoxied the connector to the led light. OEM bulb connector attached to the LED light is on the left.
Last edited:
DjJayFrree
DJ to the Stars
I just got a pair off amazon that a friend with a 09 burban just did! will be installing aSAP
RebelXL
Member
Thanks for the info Eddie!
I'm thinking of getting the ones from Black Flame Customs. They seem to be just plug and play.
I'm thinking of getting the ones from Black Flame Customs. They seem to be just plug and play.
bacin87
Full Access Member
did you buy the 50W 8000LM PHiLIPS LED Headlight Conversion Kit 2504 5202 9012 H13 Beam Bulb he suggested or did you buy the same that he bought?
