David Paul
Full Access Member
That is a slick installation. Nicely done....
LED Light Bar mounted in Z71 Rack?
- Thread starter ATIII
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
ATIII
Full Access Member
Some night pics while driving. One of the coolest mods I've done, I'm really happy with the install and the way it performs. Wish I had done it sooner.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Crcz71
Full Access Member
Makes a huge difference doesn't it? I use mine often on back roads late at night helps a lot. Looks good. Glad ya got it done.Some night pics while driving. One of the coolest mods I've done, I'm really happy with the install and the way it performs. Wish I had done it sooner.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
BlueCollarTahoe
Full Access Member
- Joined
- Sep 21, 2016
- Posts
- 538
- Reaction score
- 112
Can you post a link to the exact light bar and hinges etc needed for this mod? looks great
OP
OP
ATIII
Full Access Member
Here's the bar:
https://www.amazon.com/dp/B016E9RF2G/ref=cm_sw_r_cp_api_AvybybT5JZJWD
I just used a couple of 2" L brackets and mounted them to the side rails of the rack with some 5/16" carriage bolts.
Sent from my iPhone using Tapatalk
Perfect width for the rack. Looks awesome.
Careful pulling into a parking garage
Don't have one on the roof yet but think utilizing the rack slider bolts somehow to make a swing arm to raise/lower it would be cool
Careful pulling into a parking garage
Don't have one on the roof yet but think utilizing the rack slider bolts somehow to make a swing arm to raise/lower it would be cool
OP
OP
ATIII
Full Access Member
I finally found a car wash that it fits in. With the light I'm sitting right at 7'.Perfect width for the rack. Looks awesome.
Careful pulling into a parking garage
Don't have one on the roof yet but think utilizing the rack slider bolts somehow to make a swing arm to raise/lower it would be cool
I'm gonna take it loose and try to drill another hole in it so that the brackets run even with the rails. Should lower it about 1 1/2". Not quite as clean as far as lines as I would like.
Sent from my iPhone using Tapatalk
Definitely interested to see where that cuts off when you sink it lower. Take photos when you do.
The "4D" style spot/flood reduced my lumen count compared to the lesser watt old cracked normal style spot flood bar from middle asia.
The "4D" style spot/flood reduced my lumen count compared to the lesser watt old cracked normal style spot flood bar from middle asia.
treehan77
TYF Fiend
pics of the switch install?
OP
OP
ATIII
Full Access Member
No switch. Mine is relay triggered off of the brights. 6-HI mod & LED Bar all on with the turn lever.
Sent from my iPhone using Tapatalk
