Leveling kit with magnetic ride control

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

imnohero

Full Access Member
Joined
Nov 20, 2014
Posts
182
Reaction score
0
Location
South Carolina
Yes sir, used suspension max. I have magnetic ride. I'm not sure what was adjusted on it. As far as I know it was disconnected and then connected once kit was installed. He never mentioned about adjusting anything, so I'm

Pretty sure nothing was done to it. So far it's been a month and I don't notice any change in the ride. I'm running 22" 305-40 with auto running boards and didn't have to adjust anything. With 2.25" lift in the front, it makes it perfectly level.


Got pics you can post Getfooled? I'd like to see how it turned out.
 

Getfooled

TYF Newbie
Joined
Jan 17, 2015
Posts
15
Reaction score
1
Is there a trick to uploading pics, do they have to be rescaled. I upload from ipad and it just sits there like it's trying to load, I have broadband speed. Thanks
 

imnohero

Full Access Member
Joined
Nov 20, 2014
Posts
182
Reaction score
0
Location
South Carolina
Humm... I don't know. I always just upload them from my phone. I use Tapatalk app.

---------- Post added at 10:23 PM ---------- Previous post was at 10:22 PM ----------

I also used the SuspensionMaxx kit on my 2015 Denali XL with magnetic ride. No issues except some tire rubbing on retractable running boards which was fixed with some slight trimming...



Thanks Kerville15 for your help!


Got a pic of that as well? Is like to see that one a Denali XL like I have ordered.
 

Wristdoc

TYF Newbie
Joined
Jan 15, 2015
Posts
15
Reaction score
0
Here you go...cleaned it up last night!
 

Attachments

  • Frontquarter1.jpg
    Frontquarter1.jpg
    95.6 KB · Views: 401
  • Rearquarter1.jpg
    Rearquarter1.jpg
    20.6 KB · Views: 363
  • Side1.jpg
    Side1.jpg
    96.7 KB · Views: 365

01Konvict

Boats n Hoes
Joined
Jan 16, 2011
Posts
2,740
Reaction score
689
Location
Raleigh/SML
Looks great! The front seems a tad bit lower than the rear still? Those m/ts on a 20x9 with 0mm offset?
 

Wristdoc

TYF Newbie
Joined
Jan 15, 2015
Posts
15
Reaction score
0
Looks great! The front seems a tad bit lower than the rear still? Those m/ts on a 20x9 with 0mm offset?

Thanks. Yes, the front was raised 2.5 inches and the back 1.5 inches. I think this leaves the rear 1 inch higher than the front. My driveway has a slight slope to it and that, combined with the angle of the picture, makes it appear more dramatic in the photos than it is in person. Still, I would much rather have the truck level or the rear slightly higher as opposed to the other way around!

They are 20x9 wheels with 5" backspacing and zero offset...you are correct.
 

Forum statistics

Threads
132,219
Posts
1,864,180
Members
96,751
Latest member
Lopezdad
Top